Cut Sheet

3
Catalog No./Item Description/Specifications
5406A* Cover Clip – Covers seam
between sections of 5400C.
5406T* Twin Snap Cover Clip –
Covers seam between
sections of 5400TC.
5406TB* Base Seam Clip – Covers
side seam where two sections
of 5400 Series Raceway
Base come together.
5450* ** Device Bracket – For
mounting power and
communication devices
in-line with 5400 Series
Raceway.
For use with:
•
5507 Series Faceplates
• Ortronics
®
TracJack &
Series II Modules
• Pass & Seymour Activate
Series Inserts
• Wiremold Open System
Communication Modules
5450T* ** Twin Snap Cover Device
Bracket – For power
or communication devices
in a single compartment.
For use with:
•
5507 Series Faceplates
• Ortronics
®
TracJack &
Series II Modules
• Pass & Seymour Activate
Series Inserts
• Wiremold Open System
Communication Modules
5450A3* ** Three Device Mounting
Bracket – For mounting
power and communication
devices in-line and offset
from 5400 Series Raceway.
For use with:
•
5507 Series Faceplates
• Ortronics
®
TracJack &
Series II Modules
• Pass & Seymour Activate
Series Inserts
• Wiremold Open System
Communication Modules
Catalog No./Item Description/Specifications
5450-ORAP Ortronics Wireless Bracket –
Used to mount Ortronics
®
Wi-Jack
™
Wireless Solution
to 5400 Series Raceway.
CM-EPLA* End Plates – Includes two
outlet identification labels with
clear covers and two matching
screw covers. Required for
mounting Pass & Seymour
Activate and Wiremold Open
System communication
modules into 5450 Series
device brackets.
S2-EPL* End Plates – Includes two
outlet identification labels with
clear covers and two matching
screw covers. Required for
mounting Ortronics Series II
modules into 5450 Series
device brackets.
5408L* Transition Fitting – For
transitioning from MXN2A08
Corner Drop to a horizontal
run of 5400 Series Raceway
to the left.
5408R* Transition Fitting – For
transitioning from MXN2A08
Corner Drop to a horizontal
run of 5400 Series Raceway
to the right.
5410* End Cap – Closes off end runs
of 5400 Series Raceway and
has four 1/2" trade size KOs
for end feed.
5 5/32"
[131mm]
6"
[152mm]
2 1/2"
[64mm]
6"
[152mm]
1 25/32"
[45mm]
5 15/32"
[139mm]
7 19/32"
[193mm]
7 1/2"
[191mm]
5 3/32"
[129mm]
3/4"
[19.1mm]
2 5/8"
[68mm]
1"
[25mm]
7/8"
[22.2mm]
1 3/4"
[44mm]
5400 Raceway Fittings
ORT
P&S
OPEN
ORT
P&S
OPEN
ORT
P&S
OPEN
10"
[254mm]
1 3/4"
[44mm]
10"
[254mm]
1 3/4"
[44mm]
* Add “WH” suffix for White finish
** CM-EPLA End Plates are required when using Wiremold Open System communication modules and Pass & Seymour Activate inserts. S2-EPL
End Plates are required when using Ortronics Series II modules. To mount Ortronics TracJack modules, use 5507-4TJ or 5507-6TJ Faceplates.