Cut Sheet
3
Catalog No./Item Description/Specifications
5400TB Two- Compartment Base –
Two equal compartments –
Base accepts single or Twin
Snap Cover. 5400TB Series
Raceway available in 8' (2.44m)
lengths with pre-punched
mounting holes
5400C Full Width Cover – Use with
5400TB. Available in 8' (2.44m)
lengths.
5400TC Twin Snap Cover – Use with
5400TB Series Raceway in Twin
Snap applications. Order
separate cover for each
compartment. Available
in 8' (2.44m) lengths.
5400TWC Twin Snap Cover Wire Clip –
Retains wires in raceway.
Catalog No./Item Description/Specifications
MXN2F21 Entrance End Fitting –
For feeding corner drop
raceway from larger conduits.
Has concentric 3/4", 1", and
1 1/2" trade size KOs.
MXN2A08 Corner Drop Raceway
Base and Cover – Used as
a vertical corner feed drop
to horizontal run of 5400 or
40N2 Series Raceways.
Two compartments. Packaged
with base and cover.
MXN2FWC Wire Clip – Retains wires
in MXN2A08 Corner
Drop Raceway.
NOTE: No suffix denotes Ivory finish. Add “-WH” suffix for White finish.
5400 Series Raceway Ordering Information
6 1/8"
(156mm)
3 5/8"
(92mm)
5 1/4"
(133mm)
1 11/16"
(43mm)
8'
(2.44m)
4 31/32"
(126mm)
8'
(2.44m)
2 9/16"
(65mm) Each
8'
(2.44m)
2"
(51mm)
3 5/16"
(84mm)
8'
(2.45m)
2 5/8"
(67mm)
2 "
(51mm)
5400T Series Raceway & MXN Series Raceway Wire Fill Capacity Charts (continued)
WIRE SIZE O.D. (Approx. Dia.) NO. OF CONDUCTORS
CABLE/WIRE SIZE Inches (mm) EACH COMPARTMENT
14 AWG 0.111 (2.8) 16
12 AWG 0.130 (3.3) 14
10 AWG 0.164 (4.2) 14
8 AWG 0.216 (5.5) 15
MXN Series Raceway Wire Fill Capacities for Power
O.D. (Approx. Dia.) EA. COMPARTMENT
CABLE/WIRE SIZE Inches (mm) 40% FILL
UNSHIELDED 4-pair, 24 AWG Cat 3 0.190 (4.8) 19
TWISTED PAIR 4-pair, 24 AWG Cat 5e 0.210 (5.3) 16
4-pair, 24 AWG Cat 6 0.250 (6.3) 11
4-pair, 24 AWG Cat 6a* 0.250 (6.3) 5
25-pair, 24 AWG 0.250 (6.3) 4
COAXIAL RG6/U 0.270 (6.9) 9
FIBER ZipCord 0.118 x 0.236 (3 x 6) 20
Round 4-Strand Fiber 0.187 (4.8) 20
Round 6-Strand Fiber 0.256 (6.5) 10
MXN Series Raceway Wire Fill Capacities for Communications
NOTE: Wire fill capacity is reduced to allow for proper conductor bend radius and maximum permissible heat rise.
* Category 6 augmented (6a) cable for 10 gigabit Ethernet – maximum allowed cable diameter
per addenda No. 11 ANSI TIA/EIA 568-B.2.
5 1/4"
(133mm)
3.72 sq. in.
(2400mm
2
)
3.72 sq. in.
(2400mm
2
)
A*
B*
1 3/4"
(44mm)
Total Raceway Capacity is
7.44 sq. in. (4800mm
2
)