Cut Sheet

Catalog No./Item Description/Specifications
5450 Device Bracket – For mounting
power and communication
devices in-line with 5400TB
Series Raceway. For use with
5507 Series Faceplates,
Ortronics
®
TracJack and
Series II Modules, Pass &
Seymour
®
Activate Series
Inserts, and Wiremold
CM2 Series Open System
Communication Modules.
5450T Twin Snap Cover Device
Bracket – For power or
communication devices
in a single compartment.
For use with 5507 Series
Faceplates, Ortronics
®
TracJack
and Series II Modules, Pass &
Seymour
®
Activate Series
Inserts, and Wiremold
CM2 Series Open System
Communication Modules.
5450A3 Three Device Mounting
Bracket – For mounting up to
three power or communication
devices at one location in-line
and offset from 5400TB Series
Raceway. For use with 5507
Series Faceplates, Ortronics
®
TracJack and Series II Modules,
Pass & Seymour
®
Activate
Series Inserts, and Wiremold
CM2 Series Open System
Communication Modules.
5
Catalog No./Item Description/Specifications
CM-EPLA* End Plates – Includes two
outlet identification labels with
clear covers and two matching
screw covers. Required for
mounting Pass & Seymour
Activate and Wiremold
CM2 Series Open System
communication modules into
5450 Series device brackets.
5474 Transition Fitting – Makes
transition from 5400TB Series
Raceway to 400, 800, 2300
Series Raceways or Eclipse
™
PN03, PN05, and PN10 Series
Raceways.
5400 Series Raceway Fittings Ordering Information (Continued)
7 9/16"
(192mm)
3 3/16"
(81mm)
Ideal for offices and classrooms.
5 5/32"
(131mm)
6"
(152mm)
7/16"
(11.1mm)
5 3/4"
(146mm)
2 1/2"
(64mm)
4 7/8"
(124mm)
4 5/8"
(117mm)
7 19/32"
(193mm)
7 1/2"
(191mm)
7 5/16"
(185mm)
CONNECTION REQUIRED
FROM TO CATALOG NUMBER
5400TB 400, 800, 2300 5474
5400TB PN03, PN05, PN10 5474
5400TB MXN2A08 5408L/5408R
1/2" Trade size Conduit Side of 5400 5410 or 5410DFO
or Armored Cable
3/4", 1", 1 1/2" & 2"
Trade size Back or Side of 5400TB 5410DFO
Conduit or Armored Cable
TRANSITION FITTINGS TO EXISTING WIRING
OR OTHER WIREMOLD RACEWAYS
NOTE: No suffix denotes Ivory finish. Add “-WH” suffix for White finish.
* CM-EPLA End Plates are required when using Wiremold CM2 Series Open System communication modules and Pass & Seymour
®
Activate inserts. S2-EPL End Plates are required when using Ortronics Series II inserts. To mount Ortronics TracJack inserts, use
5507-4TJ or 5507-6TJ Faceplates.