Cut Sheet

6
NOTE: No suffix denotes Ivory finish. Add “-WH” suffix for White
finish. All faceplates have a standard measurement of 4 1/4"
x 1 7/8" (108mm x 34mm).
Catalog No./Item Description/Specifications
5507AD Modular Furniture Adapter –
For mounting modular
furniture adapters.
5507B Blank Faceplate – For covering
unused compartments in the
device bracket.
5507D Duplex Faceplate – For covering
duplex style devices. Accepts
106 Frame.
5507R Rectangular Faceplate –
For covering rectangular
style devices.
5507S Rectangular Spacer – For
mounting commercial device
plates. Installs between the
device bracket and a device.
5507SW Switch Faceplate – For covering
standard toggle switches.
5507T1 Single Receptacle Faceplate –
For covering single receptacles –
1.59" (40mm) diameter.
5507T2 Single Receptacle Faceplate –
For covering single receptacles –
1.41" (36mm) diameter.
5507RJ Dual RJ11RJ45 Connector
Faceplate – For mounting one or
two RJ keystone type connectors –
has one opening and a KO for
the other.
5507FRJ Flush Dual RJ11/RJ45 Connector
Faceplate – Same as 5507RJ
except the connectors are
recessed to provide a
flush installation.
Catalog No./Item Description/Specifications
5507-4TJ Ortronics
®
Faceplate – For
mounting Ortronics
®
communication
inserts. Accepts four TracJack
Devices.
5507-6TJ Ortronics
®
Faceplate – For
mounting Ortronics
®
communication
inserts. Accepts six TracJack
Devices.
5507MAAP Extron
®
MAAP Faceplate –
Accepts four Extron
®
Electronics
MAAP single space modules.
5507AAP Extron
®
AAP Faceplate – Accepts
two Extron
®
Electronics
AAP single space modules.
CM-ARA Angled Raceway Adapter –
Includes two outlet identification
labels with clear covers and two
matching screw covers. Provides
angled exit in multi-channel raceway
systems and WallSource
™
Boxes.
Accepts two Pass & Seymour
®
Activate 2A size modules or two
Wiremold CM2 Series open System
communication modules.
Snaps into standard device
mounting brackets. Fits 5507 Series
Faceplate opening.
S2-EPL End Plate – For mounting Ortronics
®
Series II modules into 5507 opening.
Includes two outlet identification
labels with clear covers and two
matching screw covers.
ARA-S2 Angled Raceway Adapter – For
use with multi-channel raceway
device brackets and WallSource
device mounting brackets. Angled
exit provides additional mounting
depth required for A/V connections,
as well as ensuring the required
bend radius for UTP and fiber optic
cabling. Holds two Ortronics
®
Series II modules. Fits 5507 Series
Faceplate opening.
5507 Series Faceplates Ordering Information