Cut Sheet

Features Standard Options

Communication Devices Ortronics or Pass & Seymour Other manufacturers

Activate

™

Connectivity System Devices

Electrical Devices Pass & Seymour Other manufacturers and some international devices

Base Length Longest = 8' (2.4m), shortest = 1' (305mm) –

Finish PVC – White or Ivory Custom colors

Wire Type THHN Stranded Options per speciﬁcation

Wiring Splices Insulation displacement connectors Continuous wiring or twist-on wire connector

Grounding Conductors Wire gauge per National Electrical Oversized and/or separate grounding wires

Code (NEC) and shared grounding wires

Device Identiﬁcation Gray self-adhesive polyester label Self-adhesive engraved nameplate

with black letters

Neutrals Shared neutral Oversized and/or separate neutral wires

Pigtails 1' (305mm) feeds and receptacle leads Per speciﬁcation

Conduit Feeds Raceway drilled at job site Entrance end cap

Record Drawings 3 sets and 2 copies of marked-up blueprints Per job requirements

Submittal Services Detailed Submittal Submittal Free

5400 Series Raceway Prewired Features

5400 Series Raceway Ordering Speciﬁcations for Prewired Applications

1. Detailed Submittal The detailed submittal will show exactly how each raceway run will be built including lengths, number

and type of receptacles, wiring schematics, circuiting information, etc. The contractor and/or distributor

must review, clarify any information not clearly indicated on the drawings or specs, approve, and return

to the factory before production can begin.

2. Submittal Free The Wiremold Prewired Express

™

Building Plan Checklist is ﬁlled out by the contractor or distributor

and sent along with plans, casework, and specs to the factory. No submittal is required and the project

is scheduled for production upon receipt of all necessary information.

Two options available when ordering a prewired job:

Device and Raceway Labeling Detail for Prewired Applications

n Device labeling is available in the following materials:

Gray self-adhesive polyester label with black

lettering (stan dard).

Other color self-adhesive polyester labels.

Engraving of covers with black lettering.

Engraved phenolic nameplates with adhesive back ing.

n The back of the raceway is labeled with the raceway

number and the room or area number(s).

n Data and power requirements can be switched with

data on top and power on bottom.