Cut Sheet

ManualsBrandsWiremold ManualsConduitNM DEVICE MOUNTING BRACKET 5400 WH

WIREMOLD

Nonmetallic Raceway

FEATURES & BENEFITS

ED467R20 – Updated May 2017 – For latest specs visit www.legrand.us/wiremold

5400 Series

™

Raceway provides wire and

cable management for data, voice, video,

and power applications. For school and

ofﬁce applications, this is an ideal solution

for providing ﬂexibility and accessibility of

wire and cable.

n Large cable capacity in a low proﬁle design.

Accommodates needs now and in the future.

n Twin Snap cover. Complete segregation of access to

power and low voltage services for installation ﬂexibility.

n Corner drop feed. Provides solution for feeding horizontal

runs of raceway.

n 2" (51mm) bend radius compliant ﬁttings. These ﬁttings

snap onto overlapping raceway base and cover for an

aesthetic installation. Fittings are UL veriﬁed for a 2" (51mm)

bend radius and exceed the recommendations of TIA/

EIA 569-A. They provide cable protection in lay-in and pull

through

cable installations.

n 5400TB available prewired. Manufactured to speciﬁed job

site lengths, raceway comes completely prewired, ready to

install. Jobs can be packaged by area, ﬂoor, or building and

shipped per job site requirements.

n Electrical device identiﬁcation for prewired jobs.

Eliminates guesswork and circuit tracing to speed additions

and renovations.

n A/V compatible. 5507 Series Faceplates provide A/V

compatibility for 5400 Series Raceway installations.

n Pre-punched mounting holes. Faster and easier

raceway installation.

n Device mounting in-line, offset or both. Offers ﬂexibility

and up to three separate services at the same location.

n Made of PVC material. Lightweight and easy to cut. Meets

UL ﬂammability requirements. UL Listed for up to 600V.

n Ivory and white ﬁnishes. Blend with any decor. Custom

colors available. Consult factory for more information.

Paintable using latex paint.

n Communication connectivity options. Accepts industry

standard and proprietary devices from a wide range of

manufacturers to provide a seamless and aesthetically

pleasing interface for voice, data, audio, and video

applications at the point of use.

n UL and cUL Listed component raceways. File E90378

Guide RJTX, Fittings: File E90377 Guide RJYT. Meets Article

388 of NEC and meets Section 12-600 of CEC.

Nonmetallic Raceway with Twin Snap Cover System

5400 Series Raceway with

Twin Snap Cover System.

Available Factory Prewired

Summary of content (8 pages)

PAGE 1
WIREMOLD® Nonmetallic Raceway Nonmetallic Raceway with Twin Snap Cover System Available Factory Prewired 5400 Series™ Raceway provides wire and cable management for data, voice, video, and power applications. For school and office applications, this is an ideal solution for providing flexibility and accessibility of wire and cable. 5400 Series Raceway with Twin Snap Cover System. FEATURES & BENEFITS n Large cable capacity in a low profile design. Accommodates needs now and in the future.
PAGE 2
5400 Series Raceway System Layout 5450T 5400TB 5417FO 5410DFO 5406T 5450A3 5400TWC 5400TC 5418 5474 5410 5415 5418FO 5400C 2A Communication Devices 5406A 5411FO 5450 NOTE: Illustration is for showing product applications only.
PAGE 3
5400T Series Raceway & MXN Series Raceway Wire Fill Capacity Charts (continued) Total Raceway Capacity is 7.44 sq. in. (4800mm2) MXN Series Raceway Wire Fill Capacities for Power WIRE SIZE CABLE/WIRE SIZE 14 AWG 12 AWG 10 AWG 8 AWG O.D. (Approx. Dia.) Inches (mm) 0.111 (2.8) 0.130 (3.3) 0.164 (4.2) 0.216 (5.5) NO. OF CONDUCTORS EACH COMPARTMENT 16 14 14 15 3.72 sq. in. (2400mm2) 3.72 sq. in.
PAGE 4
5400 Series Raceway Fittings Ordering Information Catalog No./Item 5406A 5 3/32" (129mm) Description/Specifications Catalog No./Item Cover Clip – For covering joint where two pieces of 5400T Cover come together. 5411FO Bend Radius Full Capacity Flat Elbow – For right angle turns on the same surface. 7 3/16" Integral dividers provide 2" (183mm) (51mm) cable bend radius for UTP and Fiber Optic 7 25/32" installations. Ideal for lay-in (198mm) or pull-through installations. 3/4" (19.
PAGE 5
400 Series Raceway Fittings Ordering Information (Continued) Catalog No./Item Description/Specifications Catalog No./Item 5450 Device Bracket – For mounting 5 3/4" (146mm) power and communication devices in-line with 5400TB Series Raceway. For use with 5507 Series Faceplates, 5 5/32" Ortronics® TracJack and (131mm) Series II Modules, Pass & Seymour® Activate Series Inserts, and Wiremold CM2 Series Open System 6" 7/16" (152mm) Communication Modules.
PAGE 6
5507 Series Faceplates Ordering Information Catalog No./Item 5507AD 5507B Description/Specifications Catalog No./Item Modular Furniture Adapter – For mounting modular furniture adapters. Blank Faceplate – For covering unused compartments in the device bracket. 5507D Duplex Faceplate – For covering duplex style devices. Accepts 106 Frame. 5507R Rectangular Faceplate – For covering rectangular style devices.
PAGE 7
5400 Series Raceway Prewired Features Features Standard Options Communication Devices Ortronics or Pass & Seymour Activate™ Connectivity System Devices Other manufacturers Electrical Devices Pass & Seymour Other manufacturers and some international devices Base Length Longest = 8' (2.
PAGE 8
NOTES NOTE: All brand and product names referenced in this document are registered trademarks or trademarks of their respective holders. NOTE: The paper used to print this document is an environmentally responsible paper with 10% post consumer waste, with FSC and SFI Chain of Custody certifications, Lacey Act complaint. 100% of the electricity used to manufacture Flo sheets is generated with Green-e certified renewable energy. ED467R20 – Updated May 2017 – For latest specs visit www.legrand.