Cut Sheet
3
Catalog No./Item Description/Specifications
5550* Device Bracket –
For mounting power
and communication
devices in-line with the
raceway. For use with:
•
5507 Series Faceplates
• Ortronics TracJack &
Series II Modules
• Pass & Seymour Activate
Series Inserts
• Wiremold Open System
Communication Modules
5550A4* Device Bracket – For
mounting power and
communication devices
in-line and offset with the
raceway.
For use with:
•
5507 Series Faceplates
• Ortronics TracJack &
Series II Modules
• Pass & Seymour Activate
Series Inserts
• Wiremold Open System
Communication Modules
5510* End Cap – Closes off
end of 5500 Series Raceway
and has three 1/2" trade size
KOs for end feed.
5510D* Entrance End Fitting –
For feeding raceway from larger
conduits. Has concentric 3/4",
1", 1 1/2", and 2" trade size
KOs on end and back.
Two removable dividers
are included.
CM-EPLA* End Plates – Includes two
outlet identification labels
with clear covers and two
matching screw covers.
Required for mounting
Pass & Seymour Activate
and Wiremold Open System
communication modules into
5550 Series device brackets.
S2-EPL End Plates – Includes two
outlet identification labels
with clear covers and two
matching screw covers.
Required for mounting
Ortronics Series II
modules into 5550 Series
device brackets.
Catalog No./Item Description/Specifications
5511FO* FiberReady 2" [51mm]
Radius, Full Capacity
Flat Elbow – 90° flat corner
with integral dividers that
provides a 2" [51mm] cable
bend radius for UTP and Fiber
optic installations. Ideal for lay-in
or pull-through installations.
5514A* Backfeed Connector – Use
when a backfeed is needed.
Has three rectangular KOs
for use with existing wall box
and three 1/2", 3/4", and 1"
trade size KOs.
5515* Tee/Take-Off Connector –
For branching raceway
at right angles.
5517FO* FiberReady 2" [51mm] Radius,
Full Capacity Internal Elbow –
90° internal corner with integral
dividers that provides a 2" [51mm]
cable bend radius for UTP and
Fiber Optic installations. Ideal
for lay-in or pull-through
installations. Replaces 5517.
5518FO* FiberReady 2" [51mm]
Radius, Full Capacity
External Elbow – 90° external
corner with integral dividers
that provides a 2" [51mm]
cable bend radius for UTP and
Fiber Optic installations. Use
the 5518FO for a radius
alternative to the 5518.
5518* External Elbow – Connects
raceway around
external corners.
5574* Transition Fitting – Makes
transition from 5500 Raceway
to the 400/800/2300/PN03/PN05
and PN10 Series Raceways.
5574A* Transition Fitting – Makes
transition from 5500 Raceway
to the 5400 Raceway.
6 11/16"
[170mm]
3 1/16"
[78mm]
3"
[76mm]
9 1/8"
[232mm]
1 13/16"
[46mm]
6 7/8"
[175mm]
6 7/8"
[175mm]
3 1/2"
[89mm]
3 3/16"
[81mm]
9"
[209mm]
2 3/8"
[60mm]
8 3/16"
[208mm]
8"
[203mm]
3 1/2"
[89mm]
6 7/8"
[175mm]
3 3/16"
[81mm]
2 7/8" x 1 3/4"
[73mm x 44mm] Cutout
6 5/8"
[168mm]
7 1/2"
[191mm]
6"
[152mm]
2 1/2"
[64mm]
1 13/16"
[46mm]
6 7/8"
[175mm]
3/8"
[10mm]
3 1/4"
[83mm]
5 13/16"
[148mm]
6 7/8"
[175mm]
5500 Raceway Fittings
*Add “-WH” suffix for White finish.
9 5/8"
[244mm]
9 3/16"
[233mm]
6 7/8"
[175mm]
ORT
P&S
OPEN
ORT
P&S
OPEN