Cut Sheet

4
Catalog No./Item Description/Specifications
5550* Device Bracket – Mounts
power and communication
devices in-line with the raceway.
For use with:
5507 Series
Faceplates,
Ortronics
®
TracJack &
Series II Modules, Pass &
Seymour
®
Activate Series Inserts,
and Wiremold CM2 Open System
Communication Modules.
5550A4* Device Bracket –
Mounts power
and communication devices
in-line and offset with the
raceway. For use with: 5507 Series
Faceplates,
Ortronics
®
TracJack &
Series II Modules, Pass &
Seymour
®
Activate Series Inserts,
and Wiremold CM2 Open System
Communication Modules.
5510* End Cap – Closes off
end of 5500 Series Raceway
and has three 1/2" trade size
KOs for end feed.
5510D* Entrance End Fitting –
Feeds raceway from larger
conduits. Has concentric 3/4",
1", 1 1/2", and 2" trade size
KOs on end and back.
Two removable dividers
are included.
5511FO* Bend Radius Control Full
Capacity Flat Elbow – 90° flat
corner with integral dividers that
provides a 2" (51mm) cable
bend radius for UTP and Fiber
optic installations. Ideal for lay-in
or pull-through installations.
5514A* Backfeed Connector – Use
when a backfeed is needed.
Has three rectangular KOs
for use with existing wall box
and three 1/2", 3/4", and 1"
trade size KOs.
Catalog No./Item Description/Specifications
5515* Tee/Take-Off Connector –
For branching raceway
at right angles.
5517FO* Bend Radius Control Full
Capacity Internal Elbow –
90° internal corner with integral
dividers that provides a 2" (51mm)
cable bend radius for UTP and
Fiber Optic installations. Ideal
for lay-in or pull-through
installations.
5518FO* Bend Radius Control Full
Capacity External Elbow – 90°
external corner with integral
dividers that provides a 2" (51mm)
cable bend radius for UTP and
Fiber Optic installations. Use
the 5518FO for a radius
alternative to the 5518.
5518* External Elbow – Joins lengths
of raceway around
external corners.
5574* Transition Fitting – 90°
transition from 5500 Series
Raceway to 400, 800, 2300,
PN03, PN05, and PN10
Series Raceways.
5574A* Transition Fitting – Makes a 90°
transition from 5500 Series
Raceway to 5400 Series Raceway.
6 11/16"
(170mm)
8"
(203mm)
2 7/8" x 1 3/4"
(73mm x 44mm) Cutout
6 5/8"
(168mm)
6"
(152mm)
5500 Series Raceway Fittings Ordering Information (continued)
*Available in Ivory finish or add “-WH” suffix for White finish.
9 3/16"
(233mm)
6 7/8"
(175mm)
6 7/8"
(175mm)
3 1/2"
(89mm)
3 1/2"
(89mm)
6 7/8"
(175mm)
1 13/16"
(46mm)
6 7/8"
(175mm)
3"
(76mm)
3 1/16"
(78mm)
9 1/8"
(232mm)
8 3/16"
(208mm)
7 1/2"
(191mm)
2 1/2"
(64mm)
9 5/8"
(244mm)
3 1/4"
(83mm)
5 13/16"
(148mm)
6 7/8"
(175mm)
1 13/16"
(46mm)
6 7/8"
(175mm)
3/8"
(10mm)
3 3/16"
(81mm)
9"
(209mm)
2 3/8"
(60mm)
6 9/16"
(167mm)
9 1/8"
(231mm)