Cut Sheet

5
Catalog No./Item Description/Specifications
5507AD* Modular Furniture Adapter –
Mounts modular furniture
adapters.
5507B* Blank Faceplate – Covers
unused compartments in the
device bracket.
5507D*
Duplex Faceplate –
Covers duplex style devices.
Accepts 106 Frame.
5507R* Rectangular Faceplate –
Covers rectangular
style devices.
5507S* Rectangular Spacer – For
mounting commercial device
plates. Installs between the
device bracket and a device.
5507SW* Switch Faceplate – Covers
standard toggle switches.
5507T1* Single Receptacle
Faceplate – Covers single
receptacles – 1.59"
(40mm) diameter.
5507T2* Single Receptacle
Faceplate – Covers single
receptacles – 1.41"
(36mm) diameter.
5507RJ* Dual RJ11/RJ45 Connector
Faceplate – Mounts one or two
RJ keystone type connectors –
has one opening and a KO for
the other.
5507FRJ* Flush Dual RJ11/RJ45
Connector Faceplate – Same
as 5507RJ except the
connectors are recessed to
provide a flush installation.
5507AAP Extron
®
AAP Faceplate –
5507AAP-WH Accepts two Extron
®
Electronics
5507AAP-G AAP single space modules.
5507AAP-FW
Catalog No./Item Description/Specifications
5507MAAP Extron
®
MAAP Faceplate –
5507MAAP-WH Accepts four Extron
®
Electronics
5507MAAP-G MAAP single space modules.
5507MAAP-FW
5507-4TJ* Ortronics
®
Faceplate – Mounts
Ortronics
®
communication inserts.
Accepts four TracJack Devices.
5507-6TJ* Ortronics
®
Faceplate – Mounts
Ortronics
®
communication
inserts. Accepts six TracJack
Devices.
ARA-S2 Angled Raceway Adapter – For
use with multi-channel raceway
device brackets and WallSource
device mounting brackets. Angled
exit provides additional mounting
depth required for A/V connections
as well as ensuring the required
bend radius for UTP and fiber optic
cabling. Holds two Ortronics
®
Series II modules.Fits 5507 Series
Faceplate opening.
CM-ARA Angled Raceway Adapter – For
use with multi-channel raceway
device brackets and WallSource
device mounting brackets. Angled
exit provides additional mounting
depth required for A/V connections
as well as ensuring the required
bend radius for UTP and fiber optic
cabling. Holds two CM2 Series
modules or two Pass & Seymour
®
2A inserts. Fits 5507 Series
Faceplate opening.
CM-EPLA* End Plates – Includes two
outlet identification labels with
clear covers and two matching
screw covers. Required for
mounting Pass & Seymour
Activate and Wiremold CM2
Open System communication
modules into 5550 Series
device brackets.
S2-EPL End Plates – Includes two
outlet identification labels with
clear covers and two matching
screw covers. Required for
mounting Ortronics Series II
modules into 5550 Series
device brackets.
5507 Series Faceplates Ordering Information
NOTE: All faceplates are 4 1/4" long x 1 11/16" wide (108mm x 43mm).
* Available in Ivory finish or add “-WH” suffix for White finish.