Installation Manual

ManualsBrandsWiremold ManualsConduit5507 PLATE WITH EXTRON MAAP GY

Wiremold Electrical Systems conform to and should be

installed and properly grounded in compliance with

requirements of the current National Electrical Code,

Canadian Electrical Code or codes administered by

local authorities.

All electrical products may represent possible shock or fire

hazard if improperly installed or used. Wiremold electrical

products are UL listed. Made for interior use only and

should be installed in conformance with current local

and/or the National Electrical Code.

5500 and 5400 Series Surface

Nonmetallic Raceway Systems

INSTALLATION INSTRUCTIONS

Installation Instruction No.: 41590R5 – Updated July 2005

Recommended Cutting Tools & Fasteners*

Herramientas de corte y sujetadores recomendados**

Outil de coupe et attaches recommandés***

Miter Saw

Use una sierra de ingletes

Scie à onglet

5400TB

5500BD3 5500C

5400C

5400TC

Use a #8 [5/16", 7.9mm Head Size] Pan Head Screw or equivalent.

Use un tornillo de cabeza redonda N° 8 (con cabeza de 7.9mm

[5/16"] o equivalente.

Utilisez une vis BER n°8 (tête do 7,9mm [5/16 po]) ou équivalent.

* Not supplied.

** No se incluye(n).

*** Non fournis.

Summary of content (8 pages)

PAGE 1
Wiremold Electrical Systems conform to and should be installed and properly grounded in compliance with requirements of the current National Electrical Code, Canadian Electrical Code or codes administered by local authorities. All electrical products may represent possible shock or fire hazard if improperly installed or used. Wiremold electrical products are UL listed. Made for interior use only and should be installed in conformance with current local and/or the National Electrical Code.
PAGE 2
1a 5500BD3 5400TB 1b 1c 5400TC 5500BD3 2 1 3 5400TB 18" 2 5500BD3 5400TB 48" [1.2m] 3 5506 5406A 48" [1.
PAGE 3
4 CM-EPLA 5550 5450 CM/Activate Insert Disassembly Desarme Démontez B. A. D. C. E. F.
PAGE 4
5400TB 6 ➮ 5450T ➮ 5450T 2 4 1 3 8a 7 5510 5410 5510D 5410DFO
PAGE 5
8b 5400TB 8c 5410DFO 5400TB 5410DFO 9 10 5500BD3 5514A 5511FO 5411FO 11 5515 5415 12 5517FO 5417FO
PAGE 6
13 5518FO 5418FO 5518 5418 14 5574 5474 15 5400TB 16 MXN2A08 5500BD3 5408L 5408R 5400TB 5574A MXN2 WIRE FILL CAPACITIES FOR POWER WIRE SIZE THHN/ THWN 14 AWG 12 AWG 10 AWG 8 AWG 6 AWG NUMBER OF CONDUCTORS Single Channel Max.
PAGE 7
5500 RACEWAY WIRE FILL CAPACITIES FOR COMMUNICATION* CABLE/WIRE SIZE 4-pair, 24 AWG, Cat 3 4-pair, 24 AWG, Cat 5e 4-pair, 24 AWG, Cat 6 UNSHIELDED TWISTED PAIR 24 24 24 24 AWG AWG AWG AWG O.D. (Approx. Inches 0.190 0.210 0.250 Dia.) [mm] [4.8] [5.3] [6.3] A 57 47 33 20% FILL* B 18 15 10 C 35 29 20 A 114 94 66 40% FILL** B 37 30 21 C 71 58 41 0.140 0.150 0.190 0.410 [3.6] [3.8] [4.8] [10.
PAGE 8
5400 RACEWAY WIRE FILL CAPACITIES FOR COMMUNICATIONS CABLE/WIRE SIZE 4-pair, 24 AWG, Cat 3 4-pair, 24 AWG, Cat 5e 4-pair, 24 AWG, Cat 6 UNSHIELDED TWISTED PAIR TELEPHONE 2-pair, 3-pair, 4-pair, 25-pair, COAXIAL 24 24 24 24 AWG AWG AWG AWG O.D. (Approx. Dia.) Inches [mm] 0.190 [4.8] 0.210 [5.3] 0.250 [6.3] 20% FILL* A 26 21 15 40% FILL** A 52 42 30 0.140 0.150 0.190 0.410 [3.6] [3.8] [4.8] [10.4] 48 42 26 5 96 84 52 11 RG58/U RG59/U RG62/U RG6/U 0.195 0.242 0.242 0.270 [5.0] [6.1] [6.1] [6.