Installation Manual

Step 1 Remove cover assembly from Poke Thru

by removing (2) 8-32 screws and lifting

cover off.

1.5 Gang Data/AV Plates

Step 1 Use pliers to bend device tabs along score

lines. Bend in both directions repeatedly

until tab breaks off.

Side walls removed

for clarity

Step 2 Install device plate using (2) 6-32 x 1/2" screws.

(provided)

CONFIGURING FEED PLATES

Step 2 Remove Poke Thru from floor by bending tabs

inward and pulling unit up.

Half Gang Plates

Step 1 Install plates using (2)

6-32 x 1/2" screws.

(provided)

NSTALLING DEVICE PLATES

NEMA 1 Gang Device

Step 1 Screw receptacle into tabs

using (2) 6-32 screws provided

ith the receptacle.

Step 2 Install plates using (2)

6-32 x 1/2" screws.

(provided)