Installation Manual

5
Step 3 Remove (2) 8-32 screws and pull off Feed
P
late or housing.
Step 4 Use (2) 8-32 screws to install new Feed Plate
o
r housing
CAUTION: To maintain fire classification, Feed Plates must
be installed.
CAUTION: To maintain fire classification, Feed Plates must
be installed.
Step 3 Slide wire tunnel out of remaining Feed
Housing.
Step 4 Rotate center housing and reattach with
(2) 8-32 screws.
180º
WIRE TUNNEL REMOVAL
Step 1 Remove Feed Housing from center and side
without J-box.
Step 2 Pull wires out of wire tunnel.
Step 5 Reattach side Feed Housing and feed plate with (4) 8-32 screws.
CAUTION: To maintain fire classification, Feed Plates must be installed.