Cut Sheet

2
Catalog No./Item Description/Specifications
400BAC 400BAC-WH Low profile, two-piece raceway with snap-on cover – Available in 5' (1.525m and length.
800BAC 800BAC-WH Supplied with wide adhesive tape along entire length of base.
2300BAC 2300BAC-WH
2300BACD 2300BACD-WH
400BAC, 800BAC, 2300BAC, 23000BACD Series Raceway Ordering Information
400BAC
800BAC
2300BAC
2300BACD
7/16"
(11.1mm)
7/8"
(22.2mm)
7/16"
(11.1mm)
11/16"
(17.5mm)
2 1/4"
(57mm)
11/16"
(17.5mm)
2 1/4"
(57mm)
1 5/16"
(33mm)
WIRE SIZE O.D. NUMBER OF CONDUCTORS
THHN/THWN Inches (mm) 400BAC 800BAC 2300BAC 2300BACD
†
14 AWG 0.111 (2.8) 5 6 15 7
12 AWG 0.130 (3.3) 3 5 14 6
10AWG 0.164 (4.2) 0 4 12 5
400, 800, 2300, 2300D Raceway Series Wire Fill Capacities for Power
O.D. 40% FILL*
CABLE/WIRE SIZE inches (mm) 400 800 2300 2300D
†
UNSHIELDED 4-Pair, 24 AWG Cat. 3 0.190 (4.8) 1 3 11 5
TWISTED PAIR 4-Pair, 24 AWG Cat. 5e 0.210 (5.3) 1 3 9 4
4-Pair, 24 AWG Cat. 6 0.250 (6.3) 1 2 6 3
4-Pair, 24 AWG Cat. 6a** 0.354 (9.0) 0 1 3 1
25-Pair, 24 AWG 0.410 (10.4) 0 0 2 1
COAXIAL RG6/U 0.270 (6.9) 0 1 5 2
FIBER Zip Cord 0.118 x 0.157 (3 x 6) 1 3 12 6
Round 4 Strand Fiber 0.187 (4.8) 1 3 12 6
Round 6 Strand Fiber 0.256 (6.5) 1 2 6 3
400, 800, 2300, 2300D Raceway Series Wire Fill Capacities for Communications
810A2, 2310A,
2310DFO
406, 806, 2306
417, 817, 2317
417, 817, 2317,
2317DFO
415, 815, 2315
2338A, 2337A
411, 811, 2311,
2311DFO
2344, 2347, 2348
418, 818, 2318,
2318DFO
400, 800, 2300, 2300D Series Raceway System Layout
NOTE: Illustration shows product applications only. 2315 Tee Fitting cannot be used with 2300D Divided Raceway.
* Wire capacity is reduced to allow for proper conductor bend radius and maximum permissible heat rise.
** Category 6 augmented (6a) cable for 10 gigabit ethernet – max allowed cable diameter per addenda No. 11 ANSI TIA/EIA 568-B.2.
†
each compartment.