Cut Sheet
3
Catalog No./Item Description/Specifications
400WC Wire Clip – For holding conductors
800WC in place.
2300WC
406 Cover Clip – For covering joint
806 where two pieces of 400BAC,
2306 800BAC or 2300BAC Series
Raceway cover come together.
410B Blank End Fitting – For closing
810B open end of 400BAC, 800BAC, or
2310B 2300BAC Raceway Series.
411* 90˚ Flat Elbow – For right angle
turns on same surface.
415* Tee – For branches at right angles.
417* Internal Elbow – For surfaces at
right angles.
CAT NO.
A
406 13/16" (20.6mm)
806 1" (25mm)
2306 2" (51mm)
Catalog No./Item Description/Specifications
418 90˚ External Elbow – For
818 right angle turns around
2318* external corners.
PVC-1 PVC Cutter – Regular duty
cutter. Ideal for use with small
nonmetallic raceway.
810A2 Entrance End Fitting – For
connecting 400 or 800 Series
Raceway with 1/2" trade size
conduit or armored cable. 1/2"
trade size KO on end and bottom.
811 90º Flat Elbow – For right angle
2311* ** turns on same surface.
815 Tee – For right angles turns on
2315* ** same surface.
817 Internal Elbow – For surfaces at
2317* right angles.
889A Reducing Connector (800-400) –
For transitioning from 800 to
400 Series Raceway.
1 1/2"
(38mm)
2"
(51mm)
1 1/2"
(38mm)
1 7/16"
(37mm)
4 1/4"
(108mm)
CAT NO. A
400WC 1/2" (12.7mm)
800WC 1" (25mm)
2300WC 1" (25mm)
400, 800, 2300, 2000D Series Fittings Ordering Information
A
A
A
CAT NO. A
418 11/2 (38mm)
818 2" (51mm)
2318 2 1/2" (64mm)
CAT NO. A B
815 4 1/8" (105mm) 2 3/4" (70mm)
2315 6" (152mm) 4 1/8" (105mm)
CAT NO. A B C
4
10B 13/16" (20.6mm) 1/2" (12.7mm) 3/8 (9.5mm)
810B 1 1/4" (32mm) 1/2" (12.7mm) 3/8 (9.5mm)
2310B 2 1/4" (57mm) 1" (25mm) 3/8 (9.5mm)
NOTE: No suffix denotes ivory finish. Add “–WH” suffix for
white finish.
* For 2300BAC and 2300BACD Raceway must be mitered to
use 2311 and 2318. 2315 cannot be used in divided raceway.
1 3/8"
(35mm)
2 1/16"
(53mm)
2 5/32"
(55mm)
1 3/8"
(35mm)
2"
(51mm)
3 3/16"
(81mm)
1 1/2"
(38mm)
A
B
A
CAT NO. A
817 2" (51mm)
2317 2 1/2" (64mm)
A
B
C
A
CAT NO. A
811 2 1/2" (64mm)
2311 4 3/16" (106mm)