Cut Sheet

An Activation for Every Application!
T
he Walkerduct Pro Series System offers a complete
range of service fittings to meet all power, data and
communication requirements. The flush flanges with
interchangeable covers provide an aesthetic appearance that
will please any architect or building owner.
The flush service fittings are available in brushed aluminum,
brass and nonmetallic finishes for single-, double- and triple-duct
runs. Fittings are available for feeding directly out of the
underfloor duct preset while keeping the connections to a
minimum visibility. These metal covers fit directly over the preset
and provide a simple and effective activation.
When a traditional pedestal service fitting is preferred, the 525
Series and the Multiplex
™
Series Service Fittings can be mounted
on the preset opening.
All service fittings are UL Listed to U.S. and Canadian safety
standards. These activations are ideal for retail stores, schools,
casinos and office buildings.
Features & Benefits
■ New brushed aluminum activations. Provides additional
finish options for better aesthetics.
■ Flush activation assemblies for carpet and tile.
Aesthetically pleasing fittings with low profile
connections for power and communications.
■
Datacom connectivity options. Accepts industry standard
and proprietary devices from a wide range of manufacturers
to provide a seamless and aesthetically pleasing interface for
voice, data, audio, and video applications at the point-of-use.
■ Flush carpet plates provide ease of connections.
Saves time and money. The preset and cover replace
the need for a handy box to make conduit connections
or splicing connections.
■ 525 Series Service Fittings and Multiplex Series Service
Fittings mount on preset. For those applications where
a pedestal fitting is desired, traditional activations can be
attached to the preset.
■ Flush flanges and covers match Walker
®
Floor Boxes.
When products are installed in the same area, they offer
a uniform appearance.
■ Wide range of activations. Whatever the requirement,
there are several options to choose from without
compromising aesthetics, functionality, or durability.
Flush nonmetallic
three-gang service
fitting for Walkerduct
Pro Series.
Flush brass and aluminum two-gang
fittings for Walkerduct Pro Series.
®
Walkerduct Pro Series
Service Fittings
ED850R7 – Updated February 2005 – For latest specs visit www.wiremold.com
– IMPORTANT –
A minimum 1 1/2" preset or afterset is required
on Pro Series underfloor duct to support standard duplex
receptacles and communication devices when using flush
activations. The 1" preset or afterset should be
specified for pedestal style fittings or when cabling will
be pulled through the activation point.
BRUSHED ALUMINUM
now available withnow available with
now available with
BRUSHED ALUMINUM
ACTIVATIONS!
ACTIVATIONS!