Cut Sheet

Catalog No./Item Description/Specifications
828PRGFI-BLK Nonmetallic GFI Cover
828PRGFI-BRN Plate – Available in black or brown.
May be used with Activate and
Ortronics Connectivity systems in
conjunction with 817, 827 and
837PCC Series flanges.
829PFL-BLK Nonmetallic Communication
829PFL-BRN Cover Plate – Individual flip
lids.* Available in black or brown.
Gasket included.
• Activate, CM-MAB bezel.
• Wiremold open inserts.
829PFLRT-BLK Nonmetallic Communication
829PFLRT-BRN Cover Plate – Individual flip
lids.* Available in black or brown.
Gasket included.
• Ortronics MAB6TJ
TracJack and MAB3S2
Series II bezels included.
7
3 3/16"
[81mm]
4 1/8"
[105mm]
3 3/16"
[81mm]
4 1/8"
[105mm]
3 3/16"
[81mm]
4 1/8"
[105mm]
Brass Cover Plate Mounting Option Nonmetallic Cover Plate Mounting Option
Activate and Ortronics inserts sold separately. Mounting Activate and Ortronics inserts sold separately. Mounting
methods typical for two- and three-gang versions. All method typical for two- and three-gang versions. Part is
sold separately. scrub water approved for use on tile floors. To maintain
scrub water resistance, blank connectivity inserts must
be inserted in unused openings.
817PCC Flange
829PFL or
829PFLRT Cover
Mounting Options for Connectivity Inserts
828GFITC
MAB6TJ (Ortronics
TracJack Bezel,
Sold Separately)
MAB3S2 (Ortronics
Series II Bezel,
Sold Separately)
CM-MAB
(Activate Bezel,
Sold Separately)
CM-MAB (Activate
Bezel Included
with 829PFL Cover)
MAB3S2 (Ortronics
Series II Bezel Included
with 829PFLRT Cover)
Scrub Water Gasket
MAB6TJ (Ortronics
TracJack Bezel
Included with
829PFLRT Cover)
817B/
818TCAL
NOTE: The 828GFITC Cover must remain open on some NOTE: 829PFL Cover must remain open on some Activate inserts.
connectivity inserts.
Catalog No./Item Description/Specifications
829PCK-BLK Nonmetallic Communication
829PCK-BRN Cover Plate – Breakouts.
Available in black or brown.
Feed through only, not for
use with a mounting plate
for communication jacks.
829PSTC-BLK Nonmetallic Communication
829PSTC-BRN Cover Plate – Data slides.
Available in black or brown.
Feed through only, not for
use with a mounting plate
for communication jacks.
Walker Floor Box Cover Plates
(Continued)
3 3/16"
[81mm]
4 1/8"
[105mm]
3 3/16"
[81mm]
4 1/8"
[105mm]
*Replacement flip lids can be ordered under Cat. No. PFL-BLK and PFL-BRN. Each Cat. No. comes with three flip lids. The above cover plates are
listed for tile, terrazzo, and carpet floors.
NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges.
Nonmetallic covers are interchangeable with aluminum flanges.