Cut Sheet

3
Catalog No./Item Description/Specifications
ALA-MABRT Ortronics
®
Cover Plate – Accepts six
Ortronics TracJack
®
or three Series II
communication inserts. Both bezels
included.
ALA-SG Cover Plate with 1 3/4" x 2 3/4"
(44mm x 70mm) Holecut – Accepts
Activate connectivity inserts with a
single-gang faceplate or angled single-
gang faceplate (not included).
ALA-2A Activate 2A Cover Plate –
Accepts a single 2A Activate insert.
Includes bezel.
ALA-ABRT Ortronics
®
Cover Plate – Accepts
two Ortronics
®
TracJack or one Series
II communication insert. Both bezels
included.
ALA-Z 3/4" (19.1mm) Grommet/
Mousehole Cover Plate – Facilitates
the exit of voice or communication
cabling. Grommet included.
ALA-LPB3S2 Ortronics
®
Low Profile Bezel Cover
Plate – Accepts three (3) Ortronics
®
Series II communication inserts.
Low Profile Bezel included.
Catalog No./Item Description/Specifications
ALA-BL Blank Cover Plate – Covers a 12"
(305mm) section of raceway.
ALA-DR Duplex Receptacle Cover Plate –
Mounts standard duplex devices to
the cover. Accepts 106 Frame.
ALA-E Single Receptacle Cover Plate –
1.40" (36mm) diameter. For straight
blade and locking single receptacles.
ALA-F Single Receptacle Cover Plate –
1.59" (40mm) diameter. For straight
blade and locking single receptacles.
ALA-G GFCI/Surge/Decorator Cover Plate –
Accepts GFCI or Pass & Seymour
®
Surge protection receptacles.
ALA-J Single Receptacle Cover Plate –
2.13" (54mm) diameter. For straight
blade or locking single receptacles.
ALA-N Toggle Switch Cover Plate –
Accepts toggle switches.
ALA-LPB Activate LPB Cover Plate – Accepts
Activate connectivity inserts. Includes
cover and Activate low profile bezel
with station label openings.
(6A size opening)
ALA-MAB Activate MAB Cover Plate –
Accepts Activate connectivity inserts.
Provides a flush installation.
Includes bezel.
A full range of fittings
are available for fast
and easy installations.
ALA3800 Component Raceway Device Plates
NOTE: ALL ALA3800 Component Raceway Device Plates shown
on this page are 12" (305mm) in length.
2" (51mm) Bend Radius Compliant Inserts installed in fittings.