Cut Sheet

ManualsBrandsWiremold ManualsConduitALA3800 Series Aluminum Cover Plate

ALA3800

Aluminum Raceway

Features & Beneﬁts

ED800R7 – Updated April 2007 – For latest specs visit www.wiremold.com

he Wiremold ALA3800 Aluminum Raceway System

meets the demands of commercial spaces, providing

a handsome and effective method of directing power

or communications services where required. The low-profile

surface mounted raceway installs easily. The two-piece

raceway means wiring is always accessible and changes are

easily accomplished.

■ Common covers. Shares cover plates with the

ALA4800 Series.

■ Datacom connectivity options. Accepts industry

standard and proprietary devices from a wide range of

manufacturers to provide a seamless and aesthetically

pleasing interface for voice, data, audio, and video

applications at the point of use.

■ Cable bend radius control inserts. Provides a 2"

[51mm] bend radius for Fiber Optic/Cat 5 installations.

■ Satin anodized ﬁnish. Has an aesthetically pleasing

appearance that resists rust, corrosion, and fading.

■ Removable cover and pre-cut device plates.

Provides easy access to wiring and maximum

ﬂexibility for adding or relocating outlets and circuits.

■ Broad range of standard ﬁttings. Accommodates

many site situations from internal and external

elbows to ﬂat tees.

■ Accommodates standard electrical wiring devices.

Accommodates most installations, including single

outlets, duplex outlets, NEMA-locking outlets, GFCI

outlets, and our Sentrex

surge protected outlets.

■ Custom prewired options available.

• Dry powder coat paint.

• Custom device openings.

■ Available prewired. Manufactured to speciﬁed job

site lengths, raceway comes ready to install. Jobs

can be packaged by room, area, ﬂoor, or building

and shipped per your job site requirements.

See page 5 for options.

■ Electrical device identiﬁcation for prewired raceway.

See page 6 for labeling options. Eliminates guesswork

or time-consuming tracing of circuits and speeds

additions and renovations.

■ UL and cUListed multioutlet assemblies. File E68073

Guide PVGT. Fittings: File E121188 Guide RJPR. Meets

Article 380 of NEC and meets Section 12-3032 of CEC.

■ UL and cUL Listed component raceway. File E73943

Guide RJBT. Fittings: File E74243, Guide RJPR. Meets

Article 386 of NEC and meets Section 12-1600 of CEC.

■ UL5 and ADA compliant. Raceway and ﬁttings meet

UL5 speciﬁcations and can be installed in conformance

with ADA requirements.

Isoduct

™

Architectural Aluminum

Single Channel Raceway

Available Factory Prewired.

Summary of content (3 pages)

PAGE 1
ALA3800 Aluminum Raceway Isoduct™ Architectural Aluminum Single Channel Raceway Available Factory Prewired. T he Wiremold ALA3800 Aluminum Raceway System meets the demands of commercial spaces, providing a handsome and effective method of directing power or communications services where required. The low-profile surface mounted raceway installs easily. The two-piece raceway means wiring is always accessible and changes are easily accomplished. Features & Beneﬁts ■ Common covers.
PAGE 2
ALA3800 Raceway Fittings Catalog No./Item Description/Speciﬁcations ALA3800B-10 2 1/4" [57mm] 3" [76mm] ALAC-5 Catalog No./Item Base – Satin Anodized ﬁnish. Nominal wall thickness of 0.078" [1.99mm]. Packed four 10' [3.00m] lengths per carton. ALA3815 Wire Clip – Used for holding conductors in place in long raceway runs. Snaps into grooves on base. ALA01 Coupling – To connect adjoining sections of base. ALA09 Grounding Adapter – For connecting equipment grounding conductor.
PAGE 3
ALA3800 Component Raceway Device Plates Catalog No./Item ALA-BL ALA-DR Description/Speciﬁcations Catalog No./Item Blank Cover Plate – To cover a 12" [305mm] section of raceway. Duplex Receptacle Cover Plate – For mounting standard duplex devices to the cover. • Accepts 106 Frame. ALA-MABRT ORT ALA-F ALA-N Toggle Switch Cover Plate – For toggle switch. ALA-LPB ALA-MAB Activate LPB Cover Plate – For installing Activate connectivity inserts.