Cut Sheet

2
n Innovative profile. Accommodates greater wiring capacity
a
nd has a more aesthetic appearance than conventional
box-shaped profiles. Design allows for more efficient use of
raceway capacity and provides 1/3 more wiring capacity
than conventional raceways including Wiremold 4000
Series
™
Raceway.
n Broad range of standard fittings. Reduces the number of
SKUs required for inventory, making ALDS4000 Series
Raceway easy to specify, order and inventory.
n Dual cover raceway. True separation of services allows
data and power installers to access their respective
channels individually.
n Full capacity channels. Power and data can be fed
through either raceway channel, with special cross-over
fittings available to maximize raceway capacity and
maintain separation of services.
n Room to grow. Generous bend radius and increased
raceway capacity support newer and larger Cat 6a capacity
cables. Raceway capacity accommodates increased power
and data requirements in installations.
n Meets or exceeds industry standards. Conforms to UL,
NEC, and NEMA standards and EIA/TIA recommendations.
n Durable satin anodized finish. Has aesthetically pleasing
appearance that resists corrosion and fading. Available in
custom colors.
n Patented design. 4000 Designer Series Aluminum
Raceway profile and components are patent protected.
n One-piece base and divider. One-piece design reduces
installation time.
n Hardware included. Each ten-foot [3.05m] section of base
includes wire clips (8 clips, 4 pre-installed) and a pair of
adjust-to-fit couplings. Adjust-to-fit
™
couplings are also
included with all raceway fittings.
n Easy to install. Adjust-to-Fit
™
couplings (included with
a
ll fittings and base sections) provide up to four inches
[102mm] of lateral adjustment, eliminating the need for
precision cuts and reducing waste caused by
measuring errors.
n Cable bend radius control. No need to order special
fittings to meet bend radius compliance standards. All
fittings include cable bend radius control and meet
the specifications for Fiber Optic and UTP/STP cabling
and exceed the TIA 569 requirements for
communications pathways.
n Activations accept industry-standard devices and
device plates. Compatible with a full-range of wiring,
data, and communication products.
n Available prewired. ALDS4000 Series Raceway can be
ordered factory prewired, saving installation time and
money. Jobs are packed to individual job requirements
and delivered on schedule to the job site.
n Streamlined design. Downward-facing activations provide
a clean, streamlined appearance. (Prewired)
n Visual circuit identification system included. No need to
order additional labels or marking systems. (Prewired)
n Unique downward-facing activations. Large bend radius
for data cables and activations, streamlines the raceway
appearance, and provides increased protection for both
activations and cabling. Only raceway system that offers
this feature. (Prewired)
F E A T U R E S & B E N E F I T S
ALDS4000
™
Series Aluminum Raceway represents a significant advancement in both the design and functionality of surface-
mounted raceway systems. Design improvements not only make the raceway easier to install and wire, they result in a more
f
unctional, higher capacity system with a more appealing, streamlined appearance. Unique adaptable fittings, multiple activation
options, upgraded color options and a host of design improvements all contribute to the overall benefits and advantages of this
innovative product. Listed below are the full range of improvements that have been incorporated into this industry-leading
raceway system.
ALDS4000 Series Raceway System Layout
ALDS4010A
ALDS4011
ALDS4018
ALDS4047MAB
ALDS4010B
ALDS4047F
ALDS4047E
ALDS4047-2A
ALDS4017
ALDS4047D
ALDS4047R
ALDS4015
ALDS4047C
ALDS4010A – Entrance End Fitting
ALDS4011 – Flat Elbow
ALDS4047E – Single Channel 1.41" [36mm] Device Plate
ALDS4047-2A – Single Channel 2A Mini Adapter Bezel
Device Plate
ALDS4047F – Single Channel 1.59" [40mm] Device Plate
ALDS4018 – External Elbow
ALDS4047D – Single Channel Duplex Device Plate
ALDS4047MAB – Single Channel MAB Device Plate
ALDS4047R – Single Channel Decorator Device Plate
ALDS4015 – Divided Tee
ALDS4047C – Single Channel One-Gang Device Plate
ALDS4010B – Blank End Fitting
ALDS4000
™
5 3/4"
[146mm]
2 1/8"
[54mm]