Cut Sheet

11
Catalog No./Item Description/Specifications
V2400 Base and Cover –
Base – V2400B .040" [1.0mm] steel.
Cover – V2400C .040" [1.0mm] steel.
Also available in custom colors.
2401 Coupling – For joining
lengths of raceway. Use
with V2400 Series.
2400WC Wire Clip – Holds conductors
2400WC in place in raceway.
V2406 Cover Clip – For covering
joint where lengths of cover
or base adjoin. Use with
V2400 Series (nonmetallic).
2409 Ground Clamp – No. 10
ground screw provided.
Use with V2400 Series Raceway.
V2410A Entrance End – For connecting
V2400 with 1/2" trade size conduit and
armored cable. Use with
V2400 Series Raceway.
V2410B Blank End – For closing open
end of V2400 Series Raceway.
Catalog No./Item Description/Specifications
V2410C Entrance End Fitting – Has 1/2" and
3/4" trade size KOs on end and bottom.
Additional 1/2" trade size KO on sides.
V2411M 90º Flat Elbow – For right angle turns
on the same surface (nonmetallic cover).
V2417M Internal Elbow – For making internal
90° corners. All steel construction.
V2418M External Elbow – For covering outside
corners (nonmetallic cover).
V2451H Back Feed Fitting – For feeding
2400 Series Raceway from an
existing outlet box. Equipped with
1/2" trade size male bushing and
locknut washer for grounding.
V2448 Device Box – Base has 1/2" trade
V2448-2 size KO and rectangular KO for
extension to wall box. Has #10
threaded hole for ground
connection. Cover has twistouts for
500/700 Series Raceway on each
end and twistouts for 2400 Series
Raceway on each side.
V2444 Extra Deep Device Box –
V2444-2 Base has rectangular knockout
to enable extension from existing
single-gang flush wall box and
1/2" and 1" concentric KOs.
Cover has twistouts for 500/700
Series Raceway on each end
and twistouts for 2400 Series
Raceway on each side.
2"
[51mm]
1 1/2"
[38mm]
1/2"
[12.7mm]
1 3/16"
[30mm]
2400 Series Raceway Fittings Ordering Information
1"
[25mm]
2 11/16"
[68mm]
1 7/8"
[48mm]
2 1/8"
[54mm]
1 29/32"
[48mm]
7/8"
[22.2mm]
Cross-Sectional Area:
1.39in
2
[897mm
2
]
ITEM CAT. NO. LENGTH MATERIAL
Base V2400B 5' [1.5m] .040 Steel
Base V2400B-10 10' [3.0m] .040 Steel
Cover V2400C 5' [1.5m] .025 Steel
Base & Cover V2400BC 5' [1.5m] .025 Steel
1 5/8"
[41mm]
CAT. NO. L W D GANG #
V2448 4 5/8" [117mm] 2 7/8" [73mm] 1 3/4" [44mm] 1
V2448-2 4 3/4" [121mm] 4 3/4" [121mm] 1 3/4" [44mm] 2
2 3/4"
[70mm]
4 3/4"
[121mm]
4 3/4"
[121mm]
W
L
D
CAT. NO. L W D GANG #
V2444 4 5/8" [117mm] 2 7/8" [73mm] 1 3/4" [44mm] 1
V2444-2 4 3/4" [121mm] 4 3/4" [121mm] 1 3/4" [44mm] 2
1 3/4"
[45mm]
1 29/32"
[49mm]
4 1/2"
[114mm]
4 1/2"
[114mm]
2"
[51mm]
1 5/8"
[41mm]
1 3/16"
[46mm]
15/16"
[23.8mm]
2 1/16"
[52mm]
3 7/8"
[98mm]