Cut Sheet

22
Catalog No./Item Description/Specifications
NM2000 Base and Cover – Extruded
PVC, ivory textured finish.
NM2003 Supporting Clip – Mount to
surface with No. 8 flathead
screw. Use with NM2000
Series.
W30/W30G Pressure-Type Wire
Connectors –
W30 – For common connection
of two, three, or four No. 12 or
No.14 solid copper conductors
(White).
W30G – For connection of
equipment grounding of 2, 3,
or 4 solid conductors No. 14
or No. 12 AWG (Green).
300V maximum; 20A
105° C maximum.
NM2006 Cover Clip – For covering
joint where lengths of NM2000
Series cover or base adjoin.
Use with NM2000 Series.
NM2010A Entrance End – Has 1/2" trade
size KO on end and bottom. Use
with NM2000 Series.
Catalog No./Item Description/Specifications
NM2010B Blank End Fitting – Use with
NM2000 Series.
NM2011 90º Flat Elbow – For right
angle turns on same surface.
NM2015 Tee – For branches at right angles.
raceway. Four couplings
furnished.
NM2017 Internal Elbow – For right
turns at inside corners.
NM2018 External Elbow – Used
for making 90º turns at
outside corners.
NM2000 Series Raceway Fittings Ordering Information
2"
[51mm]
1 3/4"
[44mm]
1 1/2"
[38mm]
2"
[51mm]
2"
[51mm]
1 7/8"
[73mm]
1 3/8"
[35mm]
1"
[25mm]
1"
[25mm]
2"
[51mm]
1 5/8"
[41mm]
ITEM CAT. NO. LENGTH MATERIAL
Base NM2000B 8' [2.4m] PVC-Ivory
Cover NM2000C 8' [2.4m] PVC-Ivory
Base & Cover NM2000BC 5' [1.52m] PVC-Ivory
1 9/16"
[40mm]
1 3/4"
[44mm]
3 13/16"
[97mm]
1 3/4"
[44mm]
3 3/8"
[86mm]
1 1/2"
[38mm]
1 3/4"
[44mm]
1 15/16"
[49mm]
1 1/16"
[27mm]
3 11/16"
[94mm]
1"
[25mm]
1 5/8"
[41mm]
4 1/2"
[114mm]
1 7/8"
[48mm]
1 5/16"
[33mm]
1"
[25mm]
1 3/4"
[44mm]
Cross-Sectional Area:
1.14in
2
[735mm
2
]
NOTE: Not for use with
aluminum conductors.
2 11/16
[68mm]
1 7/8"
[48mm]
3 3/16"
[81mm]
NOTE: NM2000 Series fittings work with both NM20 (15A) and
NM24 (20A) Plugmold Multioutlet Systems.