Cut Sheet

8
Catalog No./Item Description/Specifications
BK2015* Tee – For branches at right
G2015* angles. Couplings furnished.
V2015*
WH2015*
BK2048* Single Gang Device Box –
G2048* Cover has twistouts for 2000,
V2048* 500, and 700 Series Raceway.
WH2048* Base has 1/2" trade size KO and
S2048* rectangular KO for extension to
wall box. Base has #10 threaded
hole for ground connection.
V2048-2 Two-Gang Device Box – Cover
G2048-2 has G2048-2 Twistouts for 2000,
500, and 700 Series Raceway.
Base has 1/2" trade size KO and
rectangular KO for extension to
wall box. Base has #10 threaded
hole for ground connection.
V2089 Side Reducing Connector –
For connecting 2000 Series
Raceway with 500 Series
Raceway through side of 2000
Series Raceway.
V2089E End Reducing Connector –
For connecting 2000 Series
Raceway with 500 Series
Raceway through end of 2000
Series Raceway.
620BCK Replacement Blade Kit –
Replacement blades and
die set for 620 Cutter.
620 2000 Raceway Base and
Cover Cutter – Portable
cutter for 2000 Series Raceway
Cover and Base. Tooled steel
construction for clean and easy
square cuts every time. Total
manual operation.
Catalog No./Item Description/Specifications
2009 Ground Clamp – For connection
of equipment grounding conductor
to provide additional ground
to raceway. Use with
2000 Series Raceway.
BK2010B* Blank End Fitting – For closing
G2010B* the open end of raceway.
V2010B* Use with 2000 Series Raceway.
WH2010B*
S2010B*
BK2051H Flush Plate Adapter – For
G2051H feeding 2000 Series Raceway from
V2051H an existing wall outlet. Equipped
WH2051H with 1/2" [12.7mm] threaded stud,
S2051H toothed lockwasher for grounding,
and conduit bushing.
BK2011* 90º Flat Elbow – For right
G2011* angle turns on same surface.
V2011* Cover stop permits neat
WH2011* butting of 2000C Cover.
S2011* Two couplings furnished.
2017TC Internal Corner Coupling –
Furnished with one fiber bushing.
BK2018C* External Elbow – To continue
G2018C* raceway runs around outside
V2018C* corner. Fills the gap when
WH2018C* external corner is made by
S2018C* notching and bending the
2000B Base.
* “V” prefix indicates Ivory ScuffCoat
™
finish, “BK” for Black ScuffCoat
™
finish, “G” prefix for Gray enamel finish, “WH” for
white enamel finish, and “S” for stainless steel.
2000 Series Raceway Fittings Ordering Information (continued)
2 7/8"
[73mm]
1 3/4"
[44mm]
4 5/8"
[117mm]
Cover gap filler snapped
into place in 2018C.
1 7/8"
[48mm]
1 1/2"
[38mm]
4"
[102mm]
6"
[152mm]
2017TC
2000B
2017TC used as
a corner coupling.
2017TC
2000B
2017TC used as a
corner coupling and a
straight-through fitting.
1 1/2"
[38mm]
1 1/2"
[38mm]
1 3/4"
[44mm]
4 3/4"
[121mm]
4 3/4"
[121mm]
6"
[152mm]
3 1/4"
[83mm]
3/4"
[19.1mm]
2 1/2"
[64mm]
Ea. Leg
1 7/32"
[31mm]
How 2009 is used.
3/4"
[19.1mm]
Plugmold 2000
extended from wall
outlet using 2051H.
2051H fastened to
horizontally mounted
wall box.
4 1/2"
[114mm]
2051H fastened to
vertically mounted
wall box.