Installation Manual

9. 8CT and 8CTC COVERS: Open the lid and insert Cover

ttachment Screws through Sealing Washers and attach

Cover Flange to CRFB4 Box.

Attachment

Screw

ealing

asher

CAUTION: CRFB4 Floor Box has two sets of Cover

Attachment Holes. Use the attachment

holes closest to the mounting screw.

10. FOR 8CT FLUSH STYLE COVERS INSTALLED IN WOOD FLOORS: Create a pocket 9-3/8" diameter

[283mm] x 7/32" [5.6mm] deep, concentric with mounting hole from step 1. Place gasket (supplied with

cover) in counterbore and attach cover. Apply sealant between edge of hole and flange.

pply Sealant

or Grout

Gasket

9 3/8" [238mm]

Counterbore

7/32" [5.6mm]

Deep

11. For factory wired CRFB4 access floor boxes, use

Installation Instructions supplied with Walkerflex

Modular Wiring Systems.

CAUTION: Do not make or break connections

while circuits are energized.

ounting Hole

emove this Tab

ection to mount

CT & 8CTC Covers