Cut Sheet

Catalog No./Item Description/Specifications
V4000B-10 Base – .050" galvanized steel
G4000B-10 Packed five 10' [3.050m]
lengths per carton. Base has
two 9/32" [7.1mm] diameter
KOs on centers of approximately
18" [457mm] throughout.
V4000C Cover – .040" [1.0mm] galvanized
G4000C steel. Packed ten 5' [1.5mm]
lengths per carton.
V4000C075 7.5" [191mm] Pre-Cut Cover – For
G4000C075 mounting devices on 12" [305mm]
centers with 4007, 4046, 4047,
4048, and 4050 Series plates.
Spacing will be 12 1/4" [311mm]
with 4050.
V4000C135 13.5" [343mm] Pre-Cut Cover – For
G4000C135
mounting devices on 18" [457mm]
centers with 4007, 4046, 4047,
4048, and 4050 Series plates.
Spacing will be 18 1/4" [464mm]
with 4050.
V4000C195 19.5" [496mm] Pre-Cut Cover –
G4000C195
For mounting devices on 24"
[610mm] centers with 4007,
4046, 4047, 4048, and 4050 Series
plates. Spacing will be 24 1/4"
[616mm] with 4050.
Catalog No./Item Description/Specifications
V4000C315 31.5" [775mm] Pre-Cut Cover –.
G4000C315
For mounting devices on 36"
[915mm] centers with 4007,
4046, 4047, 4048, and 4050 Series
plates.Spacing will be 36 1/4" [mm]
with 4050.
G4000D Divider – .040" [1.0mm] galvanized
steel. One side painted buff primer
to provide identification of
compartments.* Packed ten 5'
[1.5m] lengths (50' [15.2m]) per
carton.
*4001DA Divider Clips are required to
hold divider in place.
IWE-S Spray Paint – Used for touching
GWE-S up large areas. Contains 12 oz.
of paint.
IWE-P Touch-Up Paint Pen – Used for
GWE-P touching up small areas.
Contains 0.3 oz. of paint.
4000 Series Raceway Ordering Information
1 3/4"
[44mm]
4 3/4"
[121mm]
4 3/4"
[121mm]
1 17/32"
[39mm]
4 3/4"
[121mm]
4 3/4"
[121mm]
4 3/4"
[121mm]
4 3/4"
[121mm]
2
4010DFO
4011
4047BX
4
017
4047RF
4
047JX
4018FO
5
785
5
00
4018
4
050
4015D
4
047RH
5
507RJ
4010B
4
017FO
4
075DA
NOTE: Illustration is for showing product applications only.
4000 Series Raceway System Layout
NOTE: Can only be shipped via
ground transportation.