Cut Sheet

10
FEATURES STANDARD OPTIONS
Communication Devices Ortronics or Pass & Seymour Other manufacturers
Activate Connectivity System Devices
Electrical Devices Pass & Seymour Other manufacturers and some In ter na tion al devices
Base Length Longest = 10' (2.54m), shortest = 1' (305mm) —
Installation Surface mounted —
Finish Baked enamel nish Standard colors of baked powder epoxy or
custom colors
Wire Type THHN stranded Options per specication
Wiring Splices Insulation displacement connectors Continuous wiring or twist-on wire connector
Grounding Conductors Wire gauge per National Electrical Oversized and/or separate grounding wires
Code (NEC) and shared grounding wires
Device Identification Gray self-adhesive polyester label Self-adhesive engraved nameplate
with black letters
Neutrals Shared neutral Oversized and/or separate neutral wires
Pigtails 12" (305mm) feeds and receptacle leads Per specication
Conduit Feeds Raceway drilled at job site Entrance end cap
Device Mounting Nonmetallic plates Steel plates
Record Drawings 3 sets and 2 copies of marked-up blueprints Per job requirements
Submittal Services Detailed submittal Submittal free
4000 Series Prewired Steel Raceway Features
Device and Raceway Labeling Detail for Prewired Applications
n Device labeling is available in the following materials:
Gray self-adhesive polyester label with black lettering (stan dard).
Other color self-adhesive polyester labels.
Engraved phenolic nameplates with adhesive back ing.
n The back of the raceway is labeled with the raceway number and the room or area number(s).
Labeling detail using the steel device plates.
Labeling detail using the nonmetallic 4050 Device
Plates. (Shown with Pass & Seymour Activate
connectivity inserts).
Label Window
4000 Series Ordering Specifications for Prewired Applications
1. Detailed Submittal The detailed submittal will show exactly how each raceway run will be built including lengths, number
and type of receptacles, wiring schematics, circuiting information, etc. The contractor and/or distributor must review, clarify
any information not clearly indicated on the drawings or specs, approve, and return to the factory before production can begin.
2. Submittal Free The Prewired Express Building Plan Checklist is lled out by the contractor or distributor and sent along
with plans, casework, and specs to the factory. No submittal is required and the project is scheduled for production upon
receipt of all necessary information.
Two options available when ordering a prewired job: