Cut Sheet

Catalog No./Item Description/Specifications
V4000B-10 Base – .050" galvanized steel
G4000B-10 Packed ve 10' (3.050m)
lengths per carton. Base has
two 9/32" (7.1mm) diameter
KOs on centers of approximately
18" (457mm) throughout.
V4000C Cover –
.040" (1.0mm) galvanized
G4000C steel. Packed ten 5' (1.5mm)
lengths per carton.
V4000C075 7.5" (191mm) Pre-Cut Cover – For
G4000C075 mounting devices on 12" (305mm)
centers with 4007, 4046, 4047,
4048, and 4050 Series plates.
Spacing will be 12 1/4" (311mm)
with 4050.
V4000C135 13.5" (343mm) Pre-Cut Cover – For
G4000C135 mounting devices on 18" (457mm)
centers with 4007, 4046, 4047,
4048, and 4050 Series plates.
Spacing will be 18 1/4" (464mm)
with 4050.
V4000C195 19.5" (496mm) Pre-Cut Cover –
G4000C195
For mounting devices on 24"
(610mm) centers with 4007,
4046, 4047, 4048, and 4050 Series
plates. Spacing will be 24 1/4"
(616mm) with 4050.
Catalog No./Item Description/Specifications
V4000C315 31.5" (775mm) Pre-Cut Cover –.
G4000C315
For mounting devices on 36"
(915mm) centers with 4007,
4046, 4047, 4048, and 4050 Series
plates.Spacing will be 36 1/4" (mm)
with 4050.
G4000D Divider – .040" (1.0mm) galvanized
steel. One side painted buff
primer to provide identication
of compartments.* Packed ten 5'
(1.5m) lengths (50' (15.2m)) per
carton.
IWE-S Spray Paint – Used for touching
GWE-S up large areas. Contains 12 oz.
of paint.
IWE-P Touch-Up Paint Pen – Used for
GWE-P touching up small areas.
Contains 0.3 oz. of paint.
4000 Series Raceway Ordering Information
4 3/4"
(121mm)
1 17/32"
(39mm)
1 3/4"
(44mm)
4 3/4"
(121mm)
4 3/4"
(121mm)
4 3/4"
(121mm)
4 3/4"
(121mm)
4 3/4"
(121mm)
2
4010DFO
4011
4047BX
4017
4047RF
4047JX
4018FO
5785
500
4018
4050
4015D
4047RH
5507RJ
4010B
4017FO
4075DA
NOTE: Illustration is for showing product applications only.
4000 Series Raceway System Layout
NOTE: 4001DA Divider Clips
are required to hold
divider in place.
NOTE: Can only be shipped via
ground transportation.