Cut Sheet

8 3/4"
(222mm)
1 3/4"
(44mm)
Catalog No./Item Description/Specifications
V4010DFO Divided Entrance End Fitting –
G4010DFO Has concentric 3/4", 1", and
1 1/4" trade size KOs on end
and bottom for feeding 4000
Raceway. Furnished with
removable divider and
1 1/4" (32mm) bend radius
controlled insert.
V4011FO FiberReady 2" (51mm)
G4011FO Radius Full Capacity Flat
Elbow – A 90° at corner
for divided and undivided
applications for new lay-in
or pull-through installations.
V4011 Flat Elbow – For right angle
G4011 turns on the same surface.
V4012TX Internal or External 45°
G4012TX Elbow – Can also be
assembled as an inverted
45° elbow.
V4014A Wall Box Connector – Base
G4014A has two concentric 1/2", 3/4",
1", and 1 1/4" trade size KOs,
and two rectangular 2 9/16" x
1 11/16" (65mm x 43mm) KOs.
V4015 Full Capacity Tee – For
G4015 undivided raceway only. Join
to raceway run with G4001
Couplings (not furnished).
V4015D Divided Tee – For divided
G4015D raceway only. Join to raceway
run with G4001 Couplings
(not furnished).
V4015FO FiberReady 2" (51mm)
G4015FO Radius Full Capacity Tee –
A full capacity undivided
tee tting. For new lay-in or
pull-through installations.
Catalog No./Item Description/Specifications
G4000WC Wire Clip (Plated) – For holding
conductors in place.
4001A Coupling (Galvanized Steel
Plated) – For joining lengths
of G4000B. Sold in pairs.
4011DRI 2" (51mm) Radius Insert for
Divided Flat Elbow – Insert
for V/G4011 Flat Elbow that
provides a 2" (51mm) bend
radius for UTP/STP or ber
optic cable installations.
4015DRI 2" (51mm) Radius Insert for
Divided Tee – Insert for
V/G4015D Divided Tee that
provides a 2" (51mm) bend
radius for UTP/STP or ber
optic cable installations.
4011/15RI 2" (51mm) Radius Corner
Insert – Insert for V/G4015
Undivided Tee that provides a
2" (51mm) bend radius for
UTP/STP or ber optic cable
installations.
4017/18RI 2" (51mm) Radius Insert for
Internal/External Elbows –
Insert for V/G4017 Internal
Elbow and for V/G4018
External Elbow that provides
a 2" (51mm) bend radius for
UTP/STP or ber optic
cable installations.
4001DA Divider Clip (Plated) –
Required for holding
G4000D Divider in place.
Use one every 2 1/2' (0.762m).
V4010B Blank End – For closing open
G4010B end of 4000 Base. Has two
1/2" trade size KOs.
1"
(25mm)
1"
(25mm)
4 1/2"
(114mm)
1 1/2"
(38mm)
3
12"
(305mm)
10"
(254mm)
12"
(305mm)
10"
(254mm)
12"
(305mm)
1 1/4"
(32mm)
1 3/4"
(44mm)
4 3/4"
(121mm)
4000 Series Raceway Fittings Ordering Information
2 3/4"
(70mm)
5 1/4"
(133mm)
4 3/4"
(121mm)
6 1/2"
(165mm)
12 3/4"
(324mm)
9"
(229mm)
1 3/4"
(44mm)
1 1/2"
(38mm)
1 1/8"
(29mm)
1 1/2"
(38mm)
2 1/2"
(64mm)
NOTE: Shown assembled
as internal elbow.