Cut Sheet

4
Catalog No./Item Description/Specifications
V6074 Take-Off Connector (6000 to 6000) –
G6074 For 90° tee connection at any
point along a run of 6000.
V6074A Take-Off Connector (6000 to 4000) –
G6074A For 90° tee connection at any point
along a run of 6000.
V6086 Panel Connector – For connecting
G6086 6000 with surface type panel boxes.
Accommodates maximum wire
capacity of 6000 system. Separate
C-flange fits around raceway,
covering uneven cuts to the box.
Cut 4 3/4" x 3 9/16" (121mm x 90mm)
hole in panel box.
V6007C-1 Single-Gang Device Cover –
G6007C-1 For vertical mounting single-gang
devices on undivided raceway. Accepts
commercially available wall plate
(sold separately).
V6007C-2 Two-Gang Device Plate –
G6007C-2 For installing two-gang devices or two
vertically mounted single-gang devices
on undivided raceway. Accepts
commercially available wall plate
(sold separately).
3 7/8"
(98mm)
2 7/8"
(73mm)
4 5/16"
(110mm)
2 1/2"
(64mm)
1 7/8"
(48mm)
2 7/8"
(73mm)
3 9/16"
(90mm)
4 7/8"
(124mm)
9 1/2"
(241mm)
5 3/16"
(132mm)
1 3/4"
(45mm)
3 9/16"
(90mm)
4 7/8"
(124mm)
9 1/2"
(241mm)
Catalog No./Item Description/Specifications
V6006 Connection Cover – Use where two
G6006 sections of 4000 or 6000 Series
Raceway Cover, not squarely cut,
come together.
V6010B Blank End Fitting – For closing open
G6010B end of 6000 Series Raceway.
V6011TX Combination Flat Elbow – For
G6011TX using as a flat elbow, tee, or cross,
(one 6001TX required for tee; two
for cross; not included).
V6012TX Internal or External 45° Elbow –
G6012TX For making internal or external 45°
turns in a run of 6000 Series Raceway.
Can also be assembled as an inverted
45° elbow.
V6014A Connector Fitting – Has 1 1/4", 1 1/2"
G6014A and 2" (32mm, 38mm and 51mm) trade
size KOs in back and on each side.
V6017TX Combination Internal/External 90°
G6017TX Elbow – For use as internal or external
elbow, straight-through fitting, tee, or
cross (one G6001TX required for tee or
straight through fitting; two for cross;
not included).
V6046KD Circuit Breaker Housing – KOs in
G6046KD cover can be removed for installation
of three single-pole breakers. For use
with the following breakers rated
100A maximum.
6000 Series Raceway Ordering Information
1 1/2"
(38mm)
* 4000C and 6000C are compatible with 4000B and 6000B Raceway.
†
G6001DA Divider Clips are required to hold divider in place.
1 3/4"
(44mm)
1"
(25mm)
4 3/4"
(121mm)
MANUFACTURER SERIES
General Electric THQC, THHQC
Westinghouse Quicklag, C, QCH
2 3/8"
(60mm)
4 9/16"
(116mm)
2 1/2"
(64mm)
4 1/4"
(108mm)
12"
(305mm)
3 1/2"
(89mm)