Cut Sheet

Catalog No./Item Description/Specifications
Base and Cover Covers sea
between sections of 5400C.
Catalog No./Item Description/Specifications
AL2003 Supporting Clip – Mount to
surface with No. 8 flathead
screws. Use with AL2000 Series.
W30 Pressure-Type Wire Connector –
For common connection of two,
three, or four No. 12 or No.14 solid
copper conductors. Not for
connection of equipment grounding
conductor. 300V maximum; 20A
60° C maximum. Not for use with
aluminum conductors.
4
Catalog No./Item Description/Specifications
V2489 Side Reducing Connector –
For connecting V2400 with
V500 Raceway.
V2444 Extra Deep Device Box –
V2444-2 Base has rectangular knockout
to enable extension from existing
single-gang flush wall box and
1/2" and 1" concentric KOs.
V2444 Cover has two twistouts
for 500 and 700, and two
twistouts for 2400. V2444-2
Cover has four 2400
Series twistouts.
624 2400 and 2400BD Raceway
& Cover Cutter – Portable
cutter for 2400B and 2400BD
Raceway and Cover. Tool
steel construction for clean
and easy square cuts.
Total manual operation.
624BCK Replacement Blade Kit –
Replacement blades and
die set for 624 Cutter.
Catalog No./Item Description/Specifications
V2411 90º Flat Elbow – For right angle
turns on the same surface
(nonmetallic cover).
V2417 Internal Elbow – For
making internal corners
(nonmetallic cover).
V2417M Internal Elbow – For
making internal 90° corners.
All steel construction.
V2418 External Elbow – For
covering outside corners
(nonmetallic cover).
V2451H Back Feed Fitting – For feeding
V2400 Raceway from an existing
outlet box. Equipped with 1/2"
trade size male bushing and
locknut washer for grounding.
V2448 Device Box – Cover
V2448-2 has one twistout for 2400 on
each side and ends. Base has
1/2" trade KO and rectangular
KO for extension to wall box.
Base has #10 threaded hole
for ground connection.
V2400 Series
(continued)
1 5/8"
[41mm]
1 5/8"
[41mm]
CAT NO. L W D GANG #
V2448 4 5/8" [117mm] 2 7/8" [73mm] 1 3/4" [44mm] 1
V2448-2 4 3/4" [121mm] 4 3/4" [121mm] 1 3/4" [44mm] 2
2 3/4"
[70mm]
4 3/4"
[121mm]
4 3/4"
[121mm]
W
L
D
15/16"
[23.8mm]
2 1/16"
[52mm]
3 7/8"
[98mm]
CAT NO. L W D GANG #
V2444 4 5/8" [117mm] 2 7/8" [73mm] 1 3/4" [44mm] 1
V2444-2 4 3/4" [121mm] 4 3/4" [121mm] 1 3/4" [44mm] 2
1 3/4"
[45mm]
1 29/32"
[49mm]
4 1/2"
[114mm]
4 1/2"
[114mm]
AL Series
ITEM CAT NO. LENGTH MATERIAL
Base AL2000B-5 5' [1.5m] .060 Aluminum
Cover AL2000C-5 5' [1.5m] .060 Aluminum
Base AL2000B-10 10' [3.m] .060 Aluminum
Base AL2400B-5 5' [1.5m] .060 Aluminum
Cover AL2400C 5' [1.5m] .060 Aluminum
Base AL2400B-10 10' [3.m] .060 Aluminum
1 7/16"
[37mm]