Cut Sheet
5
Catalog No./Item Description/Specifications
AL2011 90º Flat Elbow – For right
AL2411 angle turn on same surface.
Comes with two couplings.
AL2015 Tee – For branch connection of
AL2415 two runs of AL2000 Raceway.
Three couplings furnished.
AL2416 Cross – For cross connection
of two runs of AL2400 Raceway.
Four couplings furnished.
AL2017 Internal Elbow – For bending
AL2417 around internal corners. Two
couplings furnished.
AL2018 External Elbow – For making
AL2418 90º external corners. Two
couplings furnished.
AL2038 Round Fixture Box (Solid Base) –
Designed for use in hanging
fixtures. Cover takes any device
with mounting screw centers of
2 3/4", 3 1/2", and 4 1/16"
[70mm, 89mm, and [103mm].
Base has concentric 1/2"
and 3/4" KO.
AL2040A In-line Single Pole Switch –
Single pole 120V switch. Two
couplings furnished.
AL2043 In-line Receptacle – Two 15A,
120V U-ground factory wired
receptacles. Couplings furnished.
Catalog No./Item Description/Specification
AL2000WC Wire Clip – Holds conductors
AL2400WC in place in raceway (nonmetallic).
AL2001 Coupling – For joining lengths
AL2401 of raceway. Use with AL2000
and AL2400 Series.
AL2006 Cover Clip – For covering
AL2406 joint where lengths of cover
or base adjoin. Use with
AL2000 and AL2400 Series.
AL2009 Ground Clamp – Use with
AL2000 Series.
AL2409 Ground Clamp – Use with
AL2400 Series.For connection
AL2010A End Fitting – With 1/2"
hub adapter. Use
with AL2000 Series.
AL2410B2 End Fitting – With 1/2"
plastic KO. Use
with AL2400 Series.
AL2010B Blank End – Use with
AL2000 Series.
AL2410B Blank End – Use with
AL2400 Series.
AL2051 Box Adapter – For feeding
AL2451 raceway from an existing
wall outlet.
A
A
CAT NO. A
AL2017 3" [76mm]
AL2417 4" [102mm
]
B
B
A
CAT NO. A B
AL2018 1 7/8" [48mm] 3" [76mm]
AL2418 3" [76mm] 5" [127mm]
C
B
A
4 13/16"
[122mm]
1 3/8"
[35mm]
6"
[152mm]
6"
[152mm]
3"
[76mm]
1 3/4"
[44mm]
#8 Ground Stud
W/Cup Washer
1 3/8"
[35mm]
1 1/4"
[32mm]
2"
[51mm]
1"
[25mm]
1"
[25mm]
1 3/8"
[35mm]
1 1/4"
[32mm]
2"
[51mm]
4 1/2"
[114mm]
4 1/2"
[114mm]
C
A
B
6"
[152mm]
6"
[152mm]
2"
[51mm]
CAT NO. A B C
AL2011 3" [76mm] 3" [76mm] 1 9/16" [40mm]
AL2411 4" [102mm] 4" [102mm] 2" [51mm]
CAT NO. A B C
AL2015 1 7/16" [37mm] 4" [102mm] 1 9/16" [40mm]
AL2415 4" [102mm] 6" [152mm] 2" [51mm]
AL Series
(Continued)
CAT NO. L W
AL2001 1 5/8"[41mm] 1 1/2" [38mm]
AL2401 3" [76mm] 1 3/4" [44mm]
1"
[25mm]
1 1/2"
[38mm]
#8 Ground Stud
W/Cup Washer
W
L