Cut Sheet
3
Catalog No./Item Description/Specifications
W30 Pressure-Type Wire Connectors–
W30G
W30 – For common connection
of two, three, or four No. 12 or
No.14 solid copper conductors
(White).
W30G – For connection of
equipment grounding of 2, 3, or
4 solid conductors No. 14 or
No. 12 AWG (Green).
300V maximum; 20A
105° C maximum.
2000WC Wire Clip – Holds conductors
2400WC in place in raceway.
2001 Coupling – For joining lengths
of 2000 Series Raceway Base.
aBK2006* Cover Clip – For covering
G2006* joint where lengths of cover
V2006* or base adjoin. Use with
WH2006* 2000 Series.
S2006*
ny point
desired. Base come together.
v
Catalog No./Item Description/Specifications
2000* Base and Cover –
Base – 2000B .040" [1.0mm] steel.
Cover – 2000C .025" [.6mm] steel.
Supplied with two (2) 2010B Blank
End Fittings and (1) 2001
Base Coupling.
V2003 Supporting Clip – For temporary
2003 support, while positioning lengths
of raceway base. Use with V/G 2000
Series. V2003 has ivory
finish, 2003 has plated finish.
3/4"
[19.1mm]
A — 2010B Blank End Fitting
B — 2051H Flush Plate Adapter
C — 2006 Cover Clip
D — 2017TC Internal Corner Coupling
E — 2015 Tee Fitting
F — 2048-2 Two-Gang Device Box
G — 2018C External Elbow Cover
H — 2048 Single-Gang Device Box
I — 2011 90° Flat Elbow
J — 20GB609 Plugmold Strip
K — 2089 Side-Reducing Fitting
L — 5748 Single-Gang Device Box
M — 500 Raceway
N — 2010A2 Entrance End Fitting
O — 2010A3 Entrance End Fitting
P — 518 External Elbow
Q — 2089E End-Reducing Connector
A
F
E
G
H
I
J
O
L
Q
P
M
M
N
K
B
C
D
NOTE: Illustration is for showing product applications only.
Plugmold 2000 Series Raceway System Layout
* “V” prefix indicates Ivory ScuffCoat
™
finish, “G” prefix for Gray
enamel finish, “BK” for Black ScuffCoat
™
finish, “WH” for white
enamel finish, and “S” for stainless steel finish.
2"
[51mm]
Plugmold 2000 Series Raceway Fittings Ordering Information
1 5/16"
[33mm]
ITEM CAT NO. LENGTH MATERIAL
Base 2000B-5* 5' [1.5m] .040 Steel
Cover 2000C* 5' [1.5m] .025 Steel
Base & Cover 2000BC* 5' [1.5m] .025 Steel
1 9/32"
[33mm]
3/4"
[19.1mm]
Cross-Sectional Area:
0.80in
2
[516mm
2
]
NOTE: Not for use with
aluminum conductors.
2"
[51mm]