Cut Sheet

Catalog No./Item Description/Specifications
Base and Cover Covers seam
between sections of 5400C.
V2003 Supporting Clip – For temporary
2003 support, while positioning lengths
of raceway base. Use with V/G
2000 Series. V2003 has ivory
finish, 2003 has plated finish.
W30 Pressure-Type Wire Connector –
For common connection of two,
three, or four No. 12 or No.14 solid
copper conductors. Not for
connection of equipment grounding
conductor. 300V maximum; 20A
60° C maximum. Not for use with
aluminum conductors.
2000WC Wire Clip – Holds conductors
2400WC in place in raceway.
AL2000WC
AL2400WC
NM2000WC
2001 Coupling – For joining lengths
of 2000 Series Raceway Base. at
any point
desired. Base come together.
V2006* Cover Clip – For covering
G2006* joint where lengths of cover
or base adjoin. Use with
V/G 2000 Series.
V2010A3* Entrance End – Offers larger
G2010A3* capacity than V2010A2. 1/2"
trade size KOs on end, each
side and bottom. 3/4" trade
size KOs on bottom and rear.
Includes ground screw. Use
with V/G 2000 Series.
V2010A2* Entrance End – For connecting
G2010A2* V2000 with 1/2" conduit and
armored cable connectors.
1/2" trade size KOs on end,
each side and bottom.
Includes ground screw. Use
with V/G 2000 Series.
Catalog No./Item Description/Specifications
2009 Ground Clamp – For connection
of equipment grounding conductor
to provide additional ground
to raceway. Use with
V/G2000 Series.
V2010B* Blank End Fitting – For closing
G2010B* the open end of raceway.
Use with V/G 2000 Series.
V2051 Flush Plate Adapter – For
feeding 2000 from an existing
wall outlet. Equipped with 1/2"
[12.7mm] threaded stud, toothed
lockwasher for grounding, and
conduit bushing.
V2011* 90º Flat Elbow – For right
G2011* angle turns on same surface.
Cover stop permits neat
butting of 2000C Cover.
Two couplings furnished.
2017TC Internal Corner Coupling –
Furnished with one fiber bushing.
V2018C* External Elbow –To continue
G2018C* raceway runs around outside
corner. Fills the gap when
external corner is made by
notching and bending the
2000 Base.
V2015* Tee – For branches at right
G2015* angles. Couplings furnished.
* Use “V” prefix for Ivory finish and “G” prefix for Gray finish.
2"
[51mm]
V/G 2000 Series
2
2"
[51mm]
1 5/16"
[33mm]
3/4"
[19.1mm]
2 7/64"
[53mm]
1 29/32"
[47mm]
2 11/16"
[67mm]
3 22/64"
[94mm]
3"
[76mm]
1 9/32"
[58mm]
1 1/2"
[38mm]
2 1/8"
[54mm]
1 7/32"
[31mm]
How 2009 is used.
3/4"
[19.1mm]
Plugmold 2000
extended from wall
outlet using 2051H.
2051H fastened to
horizontally mounted
wall box.
4 1/2"
[114mm]
2051H fastened to
vertically mounted
wall box.
2 1/2"
[64mm]
Ea. Leg
1 1/2"
[38mm]
1 1/2"
[38mm]
2017TC
2017TC
2000B
2000B
2017TC used as
a corner coupling.
2017TC used as a
corner coupling and a
straight-through fitting.
Cover gap filler snapped
into place in 2018C.
1 7/8"
[48mm]
1 1/2"
[38mm]
4"
[102mm]
6"
[152mm]
ITEM CAT NO. LENGTH MATERIAL
Base V/G 2000B-5* 5' [1.5m] .040 Steel
Cover V/G 2000C* 5' [1.5m] .025 Steel
Base & Cover V/G 2000BC* 5' [1.5m] .025 Steel