Cut Sheet
7
Catalog No./Item Description/Specifications
NM2051H Wall Box Adapter – For feeding
NM2051V raceway from an existing wall
outlet; horizontal or vertical
applications. Provides complete
access to wall box for connections.
NM2011 90º Flat Elbow – For right
angle turns on same surface.
NM2017 Internal Elbow – For right
turns at inside corners.
NM2018 External Elbow – Used
for making 90º turns at
outside corners.
NM2027S Surge Suppression Module –
Field installed replacement module for
SGB Series surge strips. Protects all
receptacles on the strip. Contains
indicator light for proper operation
of the suppression module.
Suppression three legs.
2"
[51mm]
2"
[51mm]
1 7/8"
[73mm]
Standards UL recognized under the component program of UL Standard 1449, as defined by ANSI/NFPA 70-1990.
Service Voltage 120Vrms nominal operating voltage.
Maximum Continuous Operating Voltage 150Vrms.
Suppression Voltage (Three Line Protection) Complete surge protective device as assessed by UL:
Actual let through voltage at 6kA 1.2/50µs, 340 Volts Peak L-N.
500A, 8/20µs
Maximum Single Withstand Surge Current No less than 39kA individually between L-N, L-G,
and N-G, based on the sum of the device components.
Suppression UL1449
Mode Suppression Voltage
Line – Neutral 500V
Line – Ground 500V
Neutral – Ground 500V
Specifications for Surge Module
Catalog No./Item Description/Specifications
NM2015 Tee – For branches at right angles.
raceway. Four couplings
furnished.
NM2044 Extra Deep Device Box – For
mounting power/communication
device when additional depth is
required. Has combination
twistouts for 2700, 2800, 2900,
and NM2000.
NM2048 Sure Snap
®
Device Box – Cover
snaps onto base, no screws
required. Cover has twistouts
on all sides. Rectangular KO in
base for extension to wall box.
NM2027-15 Replacement Receptacles – 15A and
NM2027-20 20A replacement devices. 6" [152mm]
wire leads each side.
3 3/16"
[81mm]
3 3/16"
[81mm]
1/2"
[12.7mm]
1 1/8"
[29mm]
4"
[102mm]
W
L
D
2 3/4"
[70mm]
4 1/2"
[114mm]
2 3/4"
[70mm]
4 1/2"
[114mm]
4 1/2"
[114mm]
1 7/8"
[48mm]
1 5/16"
[33mm]
3 11/16"
[94mm]
1"
[25mm]
1 5/8"
[41mm]
CAT NO. L W D GANG #
NM2048 4 3/4" [121mm] 3" [76mm] 1 3/4" [44mm] 1
NM2048-2 4 3/4" [121mm] 4 7/8" [124mm] 1 3/4" [44mm] 2
CAT NO. L W D GANG #
NM2044 4 3/4" [121mm] 3" [76mm] 1 3/4" [44mm] 1
NM2044-2 4 3/4" [121mm] 4 7/8" [124mm] 1 3/4" [44mm] 2
W
L
D
NM2000 Series
(Continued)
1 3/8"
[35mm]
1"
[25mm]
1"
[25mm]
2 11/16
[68mm]
1 7/8"
[48mm]
3 3/16"
[81mm]
2"
[51mm]
1 5/8"
[41mm]