Cut Sheet

4
GB Series:
3-wire, #12 THHN (1 hot,
1 neutral and 1 ground),
1 circuit; has insulated
grounding conductor.
GBA Series:
4-wire, #12 THHN (2 hot, 1
neutral and 1 ground), 2 circuit;
outlets wired alternately; has
insulated grounding conductor.
IG Series:
3-wire, #12 THHN (1 hot, 1
neutral and 1 ground), 1 circuit;
has insulated-isolated grounding
conductor. Orange receptacles.
Plugmold 2000 Series Wiring Configurations
GB Series:
3-wire, #12 THHN (1 hot,
1 neutral and 1 ground), 1
circuit; has insulated grounding
conductor.
GBA Series:
4-wire, #12 THHN (2 hot, 1
neutral and 1 ground), 2 circuit;
outlets wired alternately; has
insulated grounding conductor.
NOTE: SNAPICOIL REELS on custom order. Snapicoil harness is available on reels if lengths greater than 50' are needed, or if multiple
lengths are required for production-type jobs. The maximum length per reel is 240' for Snapicoil with outlets 12" and 18" on
centers; 500' with outlets 30" on center. Packaging includes the necessary number of lengths of base, holecut cover, wire clips,
and couplings for complete installation. Price and delivery information should be obtained prior to specifying or ordering. To
specify or order, add “R” to the Snapicoil number. Ex: V20GB12R. Other outlet spacings available on custom order.
Receptacles are made from high impact thermoplastic. Snapicoil packaging includes the necessary lengths of 2000B Base,
2000C Hole Cut Cover, 2000WC Wire Clips, and 2001 Couplings for complete installation.
With Snapicoil
Plugmold 2000 Series Steel Part Numbering System
COLOR:
Black = BK
Gray = G
Ivory = V
White = WH
Stainless = S
RACEWAY:
2000 = 20
WIRING CONFIGURATION:
GB = GB
GBA = GBA
IG = IG*
2 0
G B
LENGTH:
24" [608mm] = 2*
36" [915mm] = 3
60" [1.5m] = 5
72" [1.8m] = 6
3
CENTER DISTANCE:
6" [152mm] = 6
9" [229mm] = 9**
12" [305mm] = 12
18" [457mm] = 18
0 6
G
2000 Series Steel Plugmold Series – Example: G20GB306
NOTE: Not all combinations of color, wiring configurations, length, and center distance are available as standard
products. For additional information, contact Wiremold Technical Support at 1-800-621-0049.
* Stainless steel only.
** 6' lengths only.
NOTE: Color codes: “V” for Ivory ScuffCoat
™
finish, “BK” for Black ScuffCoat
™
finish, “G” for Gray enamel finish, “WH” for white
enamel finish, and “S” for stainless steel. Receptacle colors match extrusion colors except for stainless steel which has black
receptacles and isolated ground versions which have orange receptacles.
* All 2000 Series Plugmold products include two (2) 2010B Blank End Fittings and one (1) 2001 Base Coupling unless otherwise
indicated in the product desciption.