Cut Sheet

8
Catalog No./Item Description/Specifications
BK2015* Tee – For branches at right
G2015* angles. Couplings furnished.
V2015*
WH2015*
BK2048* Single Gang Device Box
G2048* Cover has twistouts for 2000,
V2048* 500, and 700 Series Raceway.
WH2048* Base has 1/2" trade size KO and
S2048* rectangular KO for extension to
wall box. Base has #10 threaded
hole for ground connection.
V2048-2 Two-Gang Device Box – Cover
G2048-2 has G2048-2 Twistouts for 2000,
500, and 700 Series Raceway.
Base has 1/2" trade size KO and
rectangular KO for extension to
wall box. Base has #10 threaded
hole for ground connection.
V2089 Side Reducing Connector
For connecting 2000 Series
Raceway with 500 Series
Raceway through side of 2000
Series Raceway.
V2089E End Reducing Connector
For connecting 2000 Series
Raceway with 500 Series
Raceway through end of 2000
Series Raceway.
620BCK Replacement Blade Kit
Replacement blades and
die set for 620 Cutter.
620 2000 Raceway Base and
Cover Cutter – Portable
cutter for 2000 Series Raceway
Cover and Base. Tooled steel
construction for clean and easy
square cuts every time. Total
manual operation.
Catalog No./Item Description/Specifications
2009 Ground Clamp – For connection
of equipment grounding conductor
to provide additional ground
to raceway. Use with
2000 Series Raceway.
BK2010B* Blank End Fitting – For closing
G2010B* the open end of raceway.
V2010B* Use with 2000 Series Raceway.
WH2010B*
S2010B*
BK2051H Flush Plate Adapter – For
G2051H feeding 2000 Series Raceway from
V2051H an existing wall outlet. Equipped
WH2051H with 1/2" [12.7mm] threaded stud,
S2051H toothed lockwasher for grounding,
and conduit bushing.
BK2011* 90º Flat Elbow – For right
G2011* angle turns on same surface.
V2011* Cover stop permits neat
WH2011* butting of 2000C Cover.
S2011* Two couplings furnished.
2017TC Internal Corner Coupling
Furnished with one fiber bushing.
BK2018C* External Elbow – To continue
G2018C* raceway runs around outside
V2018C* corner. Fills the gap when
WH2018C* external corner is made by
S2018C* notching and bending the
2000B Base.
* “V” prefix indicates Ivory ScuffCoat
finish, “BK” for Black ScuffCoat
finish, “G” prefix for Gray enamel finish, “WH” for
white enamel finish, and “S” for stainless steel.
2000 Series Raceway Fittings Ordering Information (continued)
2 7/8"
[73mm]
1 3/4"
[44mm]
4 5/8"
[117mm]
Cover gap filler snapped
into place in 2018C.
1 7/8"
[48mm]
1 1/2"
[38mm]
4"
[102mm]
6"
[152mm]
2017TC
2000B
2017TC used as
a corner coupling.
2017TC
2000B
2017TC used as a
corner coupling and a
straight-through fitting.
1 1/2"
[38mm]
1 1/2"
[38mm]
1 3/4"
[44mm]
4 3/4"
[121mm]
4 3/4"
[121mm]
6"
[152mm]
3 1/4"
[83mm]
3/4"
[19.1mm]
2 1/2"
[64mm]
Ea. Leg
1 7/32"
[31mm]
How 2009 is used.
3/4"
[19.1mm]
Plugmold 2000
extended from wall
outlet using 2051H.
2051H fastened to
horizontally mounted
wall box.
4 1/2"
[114mm]
2051H fastened to
vertically mounted
wall box.