Cut Sheet

Catalog No./Item Description/Specifications
G4000D Divider – 0.040mm galvanized
steel. One side painted buff
primer for compartment identifi-
cation. Packed ten 5' [1.525m]
lengths 50' [15.24m] per carton.
G4001DA Divider Clips are required
to hold divider in place.
4001DA Divider Clip (Plated) –
Required for holding G4000D
Divider in place. Use one
every 2 1/2' [.762m].
4001A Coupling (Galvanized Steel
Plated) – For joining lengths
of G4000B. Sold in pairs
S4010B Blank End Fittings – For
closing open end of S4000
Base. Use where no end
feeding is required.
S4010B1 Blank End Fittings – For
closing open end of undivided
S4000 Base where one end
feed is required. Includes
1 1/2" [38mm] – 3/4" [19.1mm]
trade size KO.
S4010B2 Blank End Fittings – For
closing open end of S4000 Base
where end feeds are required.
Includes two 1/2" [12.7mm]
– 3/4" [19.1mm] trade size KOs.
S4010D Entrance End Fitting – Has
concentric 1/2" [12.7mm] and
3/4" [19.1mm] trade size KOs
on end, sides and bottom.
Use punch kit for trade size
up to 1 1/4 [32mm]. Removable
divider furnished. Two No.10-32
ground terminals provided.
G6008A C-Hanger cu– For sus-
pending S4000 Raceway from
structural ceiling. Designed for
use with 3/8" [9.5mm] rod.
Hangers should be installed
no more than 5' [1.525m] apart
along raceway run. Can be
bolted back-to-back for dual
runs of 4000.
Catalog No./Item Description/Specifications
S4000B Stainless Steel Base – 1 3/4" x
4 3/4"x 10' [44mm x 121mm x
3.05m]. Base has two .260"
[7mm] dia. KOs 12" [3.05m]
from each end and on centers
of approximately 24" [610mm]
throughout. Base may be
divided (field installed).
S4000BSP Stainless Steel Base –
Customer specified maximum
length is 10' [3.05mm]. Base
has two .260" [7mm] dia.KOs
on centers of approximately 24"
[610mm] throughout. Base
may be divided (field installed).
Stainless Steel Covers for S4000 Raceway
S4000C 5' [1.525m] lengths.
S4000C075 For mounting 4 1/2" [115mm]
device plates on 12" [305mm]
centers, 7 1/2" [191mm] lengths.
S4000C135 For mounting 4 1/2" [115mm]
device plates on 18" [274mm]
centers, 13 1/2" [343mm] lengths.
S4000C090 For mounting 9" [229mm]
device plates on 18" [274mm]
centers, 9" [229mm] lengths.
S4000C195 For mounting 4 1/2" [115mm]
device plates on 24" [610mm]
centers,19 1/2"[456mm] lengths.
S4000C150 For mounting 9" [229mm]
device plates on 24" [610mm]
centers 15" [343mm] lengths.
S4000315 For mounting 4 1/2" [115mm]
device plates on 36" [915mm]
centers, 31 1/2" lengths.
S4000C270 For mounting 9" [229mm]
device plates on 36" [915mm]
centers, 27" [686mm] lengths.
S4000C435 For mounting 4 1/2" [115mm]
device plates on 48" [1220mm]
centers, 43 1/2" [1106mm]
lengths.
S4000C390 For mounting 9" [229mm]
device plates on 48" [1220mm]
centers, 39" [991mm] lengths.
S4000CSP Pre-cut lengths to customer
specifications. Maximum length
is 5' [1.525m].
2
S4000 Stainless Steel Raceway
1 17/32"
[39mm]
1 3/4"
[44mm]
4 3/4"
[121mm]
1"
[25mm]
4 1/2"
[114mm]
1 1/2"
[38mm]
1 1/2"
[38mm]
2 1/2"
[64mm]