Cut Sheet

3
Catalog No./Item Description/Specifications
S4011 Flat Elbow – For right angle
turns on the same surface.
No couplings required for
installation.
S4014A Wall Box Connector cu–
Base has two concentric 3/4"
[19.1mm], and 1/2" [12.7mm]
trade size KOs, two concentric
1 1/4" [32mm] and 1" [25mm]
KOs and two rectangular 2 9/16"
x 1 11/16" [65mm x 43mm] KOs.
Two No. 10-32 ground terminals
provided. Complete with cover.
S4015 Tee – For branches at right
angles on same surface in
undivided raceway. Join to
raceway with G4001 Couplings
(not furnished).
S4015D Divided Tee – For branches at
right angles on same surface
in divided raceway. Join to race
way with two G4001 Couplings
(not furnished).
Catalog No./Item Description/Specifications
S4017 Internal Elbow – For
90° internal corners. No
couplings required.
S4018 External Elbow – For 90°
external corners. Couple to
raceway with G4001 Couplings
(not furnished).
G4017TCA Internal Corner Coupling
(Plated)
cu
– For making
an internal corner while
continuing run in a straight line.
May be used with or without
divider. Fiber bushing furnished.
If used as an internal elbow
only, S4010BO blank end
fitting is required.
S4000 Stainless Steel Raceway
Catalog No./Item Description/Specifications
CM-EPLA End Plates – Includes two
outlet identification labels with
clear covers and two matching
screw covers. Required for
mounting Pass & Seymour
Activate
™
and Wiremold Open
System communication
modules into 4050 Series
device brackets.
Catalog No./Item Description/Specifications
S2-EPL* End Plates – Includes two
outlet identification labels with
clear covers and two matching
screw covers. Required for
mounting Ortronics
®
Series II
modules into 4050 Series
device brackets.
Datacom Endplates
A full range of fittings
are available for fast
and easy installations.
Choose from the
assortment of
standard device
plates or design
your own.
4 3/4"
[121mm]
1 3/4"
[44mm]
12"
[305mm]
12"
[305mm]
1 21/32"
[27mm]