Cut Sheet

Catalog No./Item Description/Specifications
S4046JRJ Single Receptacle and
Telephone Outlets (1.6"
[40mm] Diameter) –For
installing one simplex
style receptacle and two
RJ11/45Type data/telephone
connectors. Includes bridges.
S4048B Duplex Receptacle
Cover – For installing one
duplex receptacle cover.
Includes bridges.
• Accepts 106 Frame.
S4048BF m Duplex Receptacle and
Activate MFB
u –For
installation of duplex
style device and Activate
modular furniture bezel for
data communications.
S4048R Rectangular Receptacle
Cover – For installing one
rectangular device.
Includes bridges.
S4048RF Rectangular Receptacles
and Activate MFB
u –For
installation of rectangular
style device and Activate
modular furniture bezel for
data communications.
V4050
m Nonmetallic Device
G4050
m Mounting Bracket –
For mounting power and
communication devices.
Trim plate overlaps raceway
cover providing a seamless
transition between cover
fittings. For use with:
•
5507 Series Faceplates
• Ortronics
®
TracJack &
Series II Modules
• Pass & Seymour Activate
Series Inserts
• Wiremold Open System
Communication Modules
S4086A Panel Connector
c u – To
connect S4000 with surface type
panel boxes. Accommodates
maximum wire capacity of S4000
System. Separate C-shaped
flange fits around raceway,
covering any irregularities from
cutting into box. Cut 4 3/4" x
1 3/4" [121mm x 44mm] hole
in panel box.
Catalog No./Item Description/Specifications
S4007C-1
m One-Gang Device Cover u –
For horizontal mounting of
standard single-gang devices.
Use with commercially
available faceplate
(not furnished).
S4007C-1R
m Single Device Fitting u –
For horizontal mounting of
Sentrex
®
Surge Protection
Receptacles in S4000 divided
or undivided. Also accepts
most manufacturers’ GFCI
large twistlock and rectangular
faced single-gang wiring
devices and two-port ACO.
Use with commercially available
faceplate (not furnished).
S4007C-2
m Two-Gang Device Cover u –
For horizontal mounting of
two devices. Use with
commercially available two-
gang faceplate (not furnished).
S4046DRJ Duplex Receptacle &
Telephone Outlet – For
installing one duplex
receptacle and two
RJ11/45 type telephone
connectors. Complete
with necessary bridges.
• Accepts 106 Frame.
S4046RRJ Rectangular Receptacles &
Telephone Outlets – For
installing one decorator style
device and two RJ11/45 type
data/telephone connectors.
Includes bridges.
S4046B-2 Double Duplex
Receptacle Cover –
For installing two duplex
style receptacles.
Includes bridges.
• Accepts 106 Frame.
S4046DRJ-2 Double In-Line Duplex and
Telephone Outlets – For
installing two duplex style
receptacles. Includes bridges.
• Accepts 106 Frame.
S4046ARJ Single Receptacle and
Telephone Outlets (1.4"
[35mm] Diameter) – For
installing one simplex style
receptacle and two RJ11/45
Type data/telephone
connectors. Includes bridges.
S4000 Stainless Steel Device Plates
4
m For Canadian installations add the prefix C to the catalog number.
IMPORTANT!
If your needs differ from these shown, simply design your own
using the custom design fax form (shown on page 8).
ORT
P&S
OPEN
ORT
P&S
OPEN
ORT
P&S
OPEN
ORT
P&S
OPEN
ORT
P&S
OPEN
ORT
P&S
OPEN
ORT
P&S
OPEN
ORT
P&S
OPEN
ORT
P&S
OPEN
ORT
P&S
OPEN