Cut Sheet

5
Catalog No./Item Description/Specifications
S4046JRJ Single Receptacle and Telephone
O
utlets (1.6" [40mm] Diameter) –
For installing one simplex style
receptacle and two keystone
RJ11/45Type data/telephone
connectors. Includes bridges.
S4048B Duplex Receptacle Cover – For
installing one duplex receptacle
cover. Includes bridges.
Accepts 106 Frame.
S4048BF m Duplex Receptacle and
Activate MFB
u – For
installation of duplex style device
and modular furniture bezel for
data/communications.
S4048R Rectangular Receptacle
Cover – For installing one
rectangular device.
Includes bridges.
S4048RF Rectangular Receptacles
and Activate MFB – For
installation of rectangular style
device and modular furniture bezel
for data/communications.
u
V4050 m Nonmetallic Device Mounting
G4050
m Bracket – For mounting power
and communication devices. Trim
plate overlaps raceway cover
providing a seamless transition
between cover fittings. For use with:
5507 Series Faceplates, Ortronics
®
TracJack & Series II Modules,
Pass & Seymour Activate Series
Inserts and Wiremold Open System
Communication Modules.
S4086A Panel Connector – To
connect S4000 with surface type
panel boxes. Accommodates
maximum wire capacity of S4000
System. Separate C-shaped
flange fits around raceway,
covering any irregularities from
cutting into box. Cut 4 3/4" x
1 3/4" [121mm x 44mm] hole
in panel box.
c u
Catalog No./Item Description/Specifications
S4007C-1
m One-Gang Device Cover –
F
or horizontal mounting of
standard single-gang devices.
Use with commercially available
faceplate (not furnished).
u
S4007C-1R m Single Device Fitting –
For horizontal mounting of
Surge Protection Receptacles in
S4000 divided or undivided. Also
accepts most manufacturers’ GFCI
large twistlock and rectangular
f
aced single-gang wiring devices.
Use with commercially available
faceplate (not furnished).
u
S4007C-2 m Two-Gang Device Cover –
For horizontal mounting of two
devices. Use with commercially
available two-gang faceplate
(not furnished).
u
S4046DRJ Duplex Receptacle &
Telephone Outlet – For
installing one duplex receptacle and
two RJ11/45 type telephone
connectors. Complete with
necessary bridges. Accepts
106 Frame.
S4046RRJ Rectangular Receptacles &
Telephone Outlets – For installing
one decorator style device and two
keystone RJ11/45 type data/
telephone connectors. Includes
bridges.
S4046B-2 Double Duplex Receptacle
Cover – For installing two duplex
style receptacles. Includes bridges.
Accepts 106 Frame.
S4046DRJ-2 Double In-Line Duplex and
Telephone Outlets – For
installing two duplex style
receptacles and four keystone
RJ11/RJ45 connectors. Includes
bridges. Accepts 106 Frame.
S4046ARJ Single Receptacle and Telephone
Outlets (1.4" [35mm] Diameter) –
For installing one simplex style
receptacle and two keystone
RJ11/45 Type data/telephone
connectors. Includes bridges.
S4000 Stainless Steel Device Plates Ordering Information
m For Canadian installations add the prefix “C” to the catalog number.
I M P O R T A N T !
If your needs differ from these shown, simply design your own
using the custom design fax form (shown on page 8).