Cut Sheet

Catalog No./Item Description/Specifications
S4017 Internal Elbow – For
90° internal corners. No
c
ouplings required.
S4018 External Elbow – For 90°
external corners. Couple to
raceway with 4001A Couplings
(not furnished).
G4017TCA Internal Corner Coupling
(Plated) – For making an internal
corner while continuing run in a
straight line. May be used with or
without divider. Fiber bushing
furnished. If used as an internal
elbow only, S4010BO blank end
fitting is required.
cu
4
C
atalog No./Item Description/Specifications
S4011 Flat Elbow – For right angle
turns on the same surface.
No couplings required for
installation.
S
4014A Wall Box Connector –
Base has two concentric 3/4"
and 1/2" trade size KOs, two
concentric 1 1/4" [32mm] and
1" [25mm] KOs and two
rectangular 2 9/16" x 1 11/16"
[65mm x 43mm] KOs. Two No.
10-32 ground terminals
provided. Complete with cover.
cu
S4015 Tee – For branches at right
angles on same surface in
undivided raceway. Join to
raceway with 4001A Couplings
(not furnished).
S4015D Divided Tee – For branches at
right angles on same surface
in divided raceway. Join to race
way with two 4001A Couplings
(not furnished).
S4000 Stainless Steel Raceway Ordering Information (continued)
Catalog No./Item Description/Specifications
CM-EPLA End Plates – Includes two
outlet identification labels with
clear covers and two matching
screw covers. Required for
mounting Pass & Seymour
Activate
™
and Wiremold Open
System communication
modules into 4050 Series
device brackets.
Catalog No./Item Description/Specifications
S2-EPL* End Plates – Includes two
outlet identification labels with
clear covers and two matching
screw covers. Required for
mounting Ortronics
®
Series II
modules into 4050 Series
device brackets.
Datacom Endplates Ordering Information
A full range of fittings
are available for fast
and easy installations.
Choose from the
assortment of standard
device plates or design
your own.
4 3/4"
[121mm]
1
3/4"
[
44mm]
12"
[305mm]
12"
[305mm]
1 21/32"
[27mm]