Cut Sheet

Catalog No./Item Description/Specifications
1528 Utility Box – Base and cover each
have 1/2" [12.7mm] trade size
KO. May be used as a cross, tee,
straight through, or to terminate run.
Two 1500WC wire clips included.
1542D Junction Box – May be used as a
cross, tee, or elbow. Cover has
1/2" [12.7mm] and 3/4" [19mm]
trade size concentric KOs. Two
1500WC wire clips included.
1543GL Grounding Duplex – Cover has
1500 and 2600 twistouts on all four
sides. Base has 1/2" [12.7mm], 3/4"
[19.1mm] trade size concentric
KOs. Two 1500WC Wire Clips
included. Gray finish.
1546A Single Receptacle Box – Accom-
modates commercially available
straight blade and locking single
receptacles with face diameters
of 1.38-1.40" [34.5-35mm]. Base
has 1/2" [12.7mm] and 3/4" [19mm]
trade size concentric KOs. Cover
has 1500 and 2600 twistouts on
all four sides. Two 1500WC wire
clips included.
1546B Duplex Receptacle Box – Accom-
modates commercially available
15A or 20A duplex receptacles.
Base has 1/2" [12.7mm] and
3/4" [19mm] concentric trade size
KOs. Cover has 1500 and 2600
twistouts on all four sides. Two
1500WC wire clips included. Side
wiring recommended.
1546T Telephone Outlet Box – Furnished
with 1/2" [12.7mm] rubber stem.
Accepts modular connecting
blocks within the fitting. Cover has
1500 and 2600 twistouts on both
ends and both sides. Two 1500WC
wire clips included. Not UL Listed.
1585 Combination Connector – For
connecting 1/2" [12.7mm] trade
size conduit or armored cable to
Pancake 1500.
Catalog No./Item Description/Specifications
1500 Base and Cover – .040" [1mm]
galvanized steel. Packed ten
10 ft. lengths per carton. Base
has 9/32" [7.1mm] mounting
holes on 8" [203mm] centers. Also
available in 5 ft. [1.525m] length,
packed ten 5 ft. [1.525m] lengths
per carton. Specify 1500-5 for 5 ft.
[1.525m] and 1500-10 for 10 ft.
[3.050m] sections.
1500 Base and Cover
Catalog No./Item Description/Specifications
1500WC Wire Clip – For holding conductors
in place. Not UL Listed.
1502 Fiber Bushing – Protects wires
from abrasion. Slips into open end
of 1500 where it enters a fitting.
1504 Strap – Two-hole strap. Use to
fasten 1500 to surfaces at any
point desired.
1511 90° Flat Elbow – For right angle
turns on the same surface.
1517 Internal Elbow – For internal
90° corners.
V1517B Adapter Fitting – To feed to or
from V200, V500, or V700 raceway
on wall to 1500 on floor.
1518 External Elbow – For external
90° corners.
1500 Overfloor Raceway Fittings
1500 Overfloor Raceway Fittings
1/2"
[12.7mm]
2 5/8" ea. leg
[6.7mm]
1 3/4" ea. leg
[44mm]
2 1/2"
[64mm]
2 15/16"
[75mm]
2 11/16"
[68mm]
2 1/8"
[54mm]
2 1/2" ea. leg
[64mm]
5/8"
[15.9mm]
3 1/4"
[83mm]
1 21/32"
[42mm]
4" dia.
[102mm]
23/32"
[42mm]
1 5/16"
[33mm]
5 1/16"
[129mm]
3 1/16"
[78mm]
1 5/16"
[33mm]
1.405" dia.
[36mm]
5 1/16"
[129mm]
3 1/16"
[78mm]
1 5/16"
[33mm]
5 1/16"
[129mm]
3 1/16"
[78mm]
1 5/16"
[33mm]
5 1/16"
[129mm]
3 1/16"
[78mm]
1 21/32"
[42mm]
3 1/4"
[83mm]
27/32"
[21.4mm]
3/4"
[19mm]
1 5/8"
[41mm]
3/8"
[9.5mm]
11/32"
[8.8mm]
1 9/16"
[39.3mm]