Cut Sheet

3
V
Catalog No./Item Description/Specifications
W30 Pressure Type Wire Connector –
For connecting two, three, or
four No. 12 or No. 14 solid copper
conductors. 300V maximum. Not for
connection with equipment ground
conductor
2100WC Wire Clip (Plated) – For holding
conductors in place.
2101 Coupling (Galvanized Steel
Unpainted) – For joining lengths
of 2100.
2101A Rigid Coupling (Galvanized
Steel Unpainted) – Provides
additional rigidity in joining
raceways. Set screws included.
2109 Ground Clamp – For
connecting equipment
grounding conductor.
2003 Supporting Clip (Plated) –
For supporting lengths of
2000 or 2100 at any point.
Use No. 6 flathead screw
to mount.
V2106 Cover Clip – For covering
seam when joining 2100
cover, not squarely cut.
Not UL Listed.
V2110A Entrance End Fitting –
For connecting 2100 with
1/2" conduit and armored
cable connectors. 1/2
trade size KO on all
sides except top.
V2110B Blank End Fitting –
For closing open end
of 2100 Raceway.
Catalog No./Item Description/Specifications
V2110C1 Entrance End Fitting –
Has 1/2 and 3/4
concentric trade size
KOs on end and bottom.
1/2 KO on sides.
V2111 90° Flat Elbow – For right angle
turns on same surface. Couplings
furnished.
V2115 Tee – For branches at right angles.
Couplings furnished.
V2117TC Internal Corner Coupling –
For internal 90° runs.
V2118A External Corner
Coupling – For surfaces
at right angles.
2126 Keyless Socket – Medium
base lamp holder 660W,
250V. Black general
purpose phenolic.
V2051H Back Feed Fitting –
For feeding V2100 Raceway
from an existing outlet box.
Equipped with 1/2" trade size
male bushing and lock nut
washer for grounding.
2686FO Adjustable Offset Connector –
Eliminates offsetting V2100 in
connecting with surface panel
boxes. Has 3/4 and 1 concentric
trade size KOs with 1 KO
elongated so adjustment from
surface to center of bushing is 1"
[25mm] minimum to 1 5/8" [41mm]
maximum. Has twistouts for
Pancake 2600. Cover is nonmetallic.
1 5/16"
[33mm]
1/2"
[12.7mm]
1 3/4"
[44mm]
1 3/4"
[44mm]
1 3/4"
[44mm]
2"
[51mm]
1 1/4"
[32mm]
3/8"
[9.5mm]
1 11/32"
[34mm]
1 1/4"
[32mm]
5/8"
[15.9mm]
2 5/16"
[59mm]
1 1/2"
[38mm]
3/4"
[19mm]
V2100 Raceway Fittings
2 7/16"
[62mm]
2 7/64"
[53mm]
1 29/32"
[47mm]
3 22/64"
[94mm]
2 11/16"
[67mm]
Wire capacity when used as a
straight through fitting.
Size AWG
Type #6 #8 #10 #12 #14
THHN, THWN 3 4 7 10 14
4"
[102mm]
1 1/2"
[38mm]
2"
[51mm]
1 1/4"
[32mm]
3"
[76mm]
1 1/4"
[32mm]
2 31/32"
[75mm]
4 1/2" Sq.
[115mm]
1"
[25mm]
3"
[76mm]
1 9/16"
[39mm]
* Larger gangs available, consult factory.