Cut Sheet

ManualsBrandsWiremold ManualsConduitDivided Over Raceway Box, 2-Gang, 2400 Series, Steel, Ivory

2400

& 2400D

Series Steel Raceway

Features & Benefits

ED874R18 – Updated December 2007 – For latest specs visit www.wiremold.com

he 2400 Series Raceway from

Wiremold/Legrand is a single

compartment raceway designed for

communication or power applications and

ideal for use in classrooms, offices, and hotel

applications, or anywhere a small low profile

raceway is needed.

The 2400D Series Divided Raceway is a

low profile steel raceway for use where a

limited number of power and low voltage

cables are required in the same raceway.

Low Profile, Single and Dual Channel, Steel Raceway

■ Steel raceway. Provides superior strength for any

dry location.

■ Single- and dual-compartment attractive low profile

raceway design. Provides functionality and flexibility

with aesthetics for single or dual service applications.

■ Downward facing activations. Streamlines the raceway

appearance and provides increased protection for both

activations and cabling.

■ ScuffCoat

™

finish. Tough durable ScuffCoat finish

makes a scratch-resistant surface that can be painted.

■ Complete line of fittings. Provides complete wiring solution

and allows for interconnection between raceway systems.

■ Removable cover. Allows easy access to wiring for changes

and additions.

■ One- and two-gang device boxes. Now you can wire

devices into the raceway system, making 2400 Series

Raceway an excellent choice for communication wiring.

■ Over the raceway boxes. Provides tremendous labor

savings. Boxes mount over continuous run of raceway base

eliminating the need to cut raceway when locating devices.

■ Radiused fittings. Corner and tee fittings are UL verified for a

2" [51mm] bend radius and exceed the recommendations of

EIA/TIA 569A. These fittings provide cable protection in both

lay-in and pull-through cable installations.

■ V2475D Bridge Fitting. Provides ability to bridge

2400 Series Raceways over existing installations of 2400,

700, and 500 Series Raceways.

■ In-line field-configurable receptacles. Receptacles can

be installed at any point along the raceway without a box.

■ In-line 106 frame data outlet. A wide variety of data

modules can be installed anywhere along the raceway

run without a box.

■ Datacom connectivity options. Accepts industry standard

and proprietary devices from a wide range of manufacturers

to provide a seamless and aesthetically pleasing interface for

voice, data, audio, and video applications at the point of use.

■

Listed.

24DWNR Downward Facing

Activation shown in a

security application.

2400 Series Raceway shown

with our new 2444D-2N Divided

Device Box in a typical

classroom application.

2400 Series Raceway shown with our

new Downward Facing Receptacles in

a typical school library application.

Summary of content (12 pages)

PAGE 1
2400® & 2400D® Series Steel Raceway Low Profile, Single and Dual Channel, Steel Raceway h e 2400 Series Raceway from Wiremold / Legrand is a single compartment raceway designed for communication or power applications and ideal for use in classrooms, offices, and hotel applications, or anywhere a small low profile raceway is needed. The 2400D Series Divided Raceway is a low profile steel raceway for use where a limited number of power and low voltage cables are required in the same raceway.
PAGE 2
400 Series Raceway System Layout (Power Applications) 4000 4089 2417M 2489 2448-2 2427 Series Receptacles 2410C 2426 24DWND 24DWNR 2451H 2415M 500 2400 5747 2406 2411M 2418M 2448 24S36066BX99IV 1500 2600 2686FO NOTE: Illustration is for product applications and may not represent proper circuit wiring. Color prefix is not included in part number identification.
PAGE 3
2400 Series Raceway Wire Fill Capacities 2400 2400 Raceway Wire Fill Capacities for Power* WIRE SIZE THHN/THWN NUMBER OF CONDUCTORS (40% FILL) WITHOUT WITH 2427 DEVICES RECEPTACLE O.D. 14 AWG 12 AWG 10 AWG Inches [mm] 0.111 0.130 0.164 [2.8] [3.3] [4.2] 57 41 26 12 9 – 7/8" [22mm] 1.39in2 [897mm 2] 1 29/32" [48mm] *For additional information refer to section T1 of catalog ED439 (Buyers Guide) *For additional information refer to section T1.
PAGE 4
2400 Series Raceway Fittings Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications 2400WC Wire Clip – For additional support of conductors. V2410FC 2410FC-FW Full Capacity Entrance End Fitting – For feeding 2400 Series Raceway. Includes three 3/4" and 1" concentric trade size KOs. 1" [25mm] 2" [51mm] 2401 Coupling – For joining lengths of 2400B Base.
PAGE 5
2400 Series Raceway Fittings (continued) Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications V2417M 2417M-FW Internal Elbow – For making internal 90° corners. V2444 2444-FW Extra Deep Device Box – One-gang device box has extra depth to permit installation of cabling that requires greater bend radius and storage. Cover has one twistout for 2400 Series Raceway on two sides and one twistout for 500 and 700 Series Raceway on the top and bottom.
PAGE 6
2400 Series Raceway Fittings Catalog No./Item Description/Specifications V2448 2448-FW 4 5/8" [117mm] 2 7/8" [73mm] 1 3/4" [44mm] Device Box – One-gang device box. Cover has one twistout for 2400 Series Raceway on two sides and one twistouts for 500 and 700 Series Raceway on the top and bottom. Base includes knockout to enable extension from existing single-gang flush wall box and 1/2" trade size KOs. Accepts industry standard faceplates for electrical and communication devices.
PAGE 7
2400 Series Raceway Receptacles Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications V2407-3TJ 2407-3TJFW 106 Device Bracket and Frame – For installing three Ortronics TracJack device modules in 2400 Series Raceway. Will not support Quad 100 Frame. IG2427GA 15A Isolated Ground Duplex Receptacle – 3-Wire 125V NEMA 5-15R orange receptacle provided with 10-1/2" [267mm] pigtails and inline splice connectors.
PAGE 8
2400 Series Divided Raceway Wire Fill Capacities 2400 Series Divided Raceway Wire Fill Capacities for Power WIRE SIZE THHN/THWN O.D. 14 AWG 12 AWG 10 AWG Inches [mm] 0.111 0.130 0.164 [2.8] [3.3] [4.2] 2400D NUMBER OF CONDUCTORS (40% FILL) 1/3 COMP. 2/3 COMP. 11 9 6 7/8" [22mm] 26 19 11 .864in.2 [558mm2] 1 29/32" [48mm] .374in.2 [241mm2] *For additional information refer to section T1 of catalog ED439 (Buyers Guide) *For additional information refer to section T1.
PAGE 9
2400 Series Divided Raceway Fittings (continued) Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications 2400WC Wire Clip – For additional support of conductors. V2411DFO 2411DFO-FW Radiused Divided Flat Elbow – A 90° flat elbow with integral dividers to provide 2" [51mm] full capacity cable bend radius for fiber optic and UTP/STP cable installations. Ideal for lay-in or pull-through installations. Couplings included.
PAGE 10
2400 Series Divided Raceway Fittings (continued) Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications V24DWND 24DWND-FW Downward Duplex Device Bracket – Labor saving over-theraceway device bracket. For 15A or 20A duplex receptacles or 106 style data frame in 2400 Series Raceway. V2444D-2N 2444D-2NFW Divided Box – Labor savings over-the- raceway box. A divided two-gang box for use with 2400 Series Raceway. Allows both power and low voltage at a single pointof-use.
PAGE 11
5507 Series Faceplates Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications 5507AD 5507AD-FW Modular Furniture Adapter – For mounting Activate modular furniture bezel and other modular furniture adapters. 5507RJ 5507RJ-FW Dual RJ11/RJ45 Connector Faceplate – For mounting one or two keystone device modules, has one opening and a KO for the other. 5507B 5507B-FW Blank Faceplate – For covering unused compartments in the device bracket.
PAGE 12
Datacom Connectivity Options Now you have a wide range of options for providing datacom connectivity into Wiremold® Cable Management Systems.