Cut Sheet

ManualsBrandsWiremold ManualsConduitPlugmold Outlet Strip, Steel, Ivory, 12 Outlets, 6" Centers, 6' Long

he selection of steel, aluminum, and nonmetallic

provides a versatile solution for many applications.

Plugmold sections offer single or alternating circuits,

standard or isolated ground receptacles, and Snapicoil

harnesses of prewired receptacles or cord ended units.

Steel Plugmold comes in an ivory ScuffCoat

™

or gray

enamel finish. The ScuffCoat finish is scratch resistant and

protects against nicks and chips while preventing color from

fading.

Aluminum Plugmold offers an attractive choice

for hospital and commercial labs. The finish offers high-tech

aesthetics and corrosion resistance.

Nonmetallic Plugmold has a textured ivory finish with

duplex receptacles. This series offers a field serviceable

surge module that protects the entire Plugmold strip and

makes on-site changes easy.

Plugmold

Systems

Features & Benefits

■ Steel, aluminum, or nonmetallic material. Variety provides

choice for the application.

■ Many finishes. Ivory ScuffCoat finish or gray surface for steel,

aluminum satin anodized, and ivory nonmetallic textured finish.

■ Compact, low profile appearance. Requires minimal space.

■ Full range of fittings. Provides a complete wiring solution.

■ Single, alternating circuit, and isolated ground receptacles

available. Meets virtually any job requirement.

■ Variety of lengths. Ideal for different spaces.

■ Choose receptacle spacing. Suits many applications.

■ Snapicoil harnesses with different lengths and receptacle

spacing. Offers a solution for many electrical requirements.

■ Duplex receptacle. Aesthetically pleasing, functional 20A

duplex for the 24S (2400) Series.

■ Single- and dual-gang boxes available. Wire devices into

the raceway system.

■ Field replaceable surge module. Replaces the module, not

a receptacle (NM2000 Series only).

■ Customization available. All products can be modified to

accommodate virtually any application.

■ 2400 Backfeed. Fitting helps installation over an existing

wall box.

■ Datacom connectivity options. Accepts industry standard

and proprietary devices from a wide range of manufacturers

to provide a seamless and aesthetically pleasing interface for

voice, data, audio, and video applications at the point-of-use.

■ UL and cUL Listed. Safety and reliability in the applications.

■ cUL Listed 24S (2400) Series Plugmold. This 20A

version is cUL Listed.

Steel, Aluminum, and Nonmetallic Plugmold

Raceway and Multioutlet Assemblies

Plugmold Systems come in a variety of finishes and configurations.

Plugmold Systems shown in typical applications.

ED1025R7 – Updated February 2005 – For latest specs visit www.wiremold.com

Summary of content (12 pages)

PAGE 1
Plugmold® Systems Steel, Aluminum, and Nonmetallic Plugmold Raceway and Multioutlet Assemblies he selection of steel, aluminum, and nonmetallic provides a versatile solution for many applications. Plugmold sections offer single or alternating circuits, standard or isolated ground receptacles, and Snapicoil® harnesses of prewired receptacles or cord ended units. Steel Plugmold comes in an ivory ScuffCoat™ or gray enamel finish.
PAGE 2
V/G 2000 Series Catalog No./Item ITEM CAT NO. Base V/G 2000B-5* Cover V/G 2000C* Base & Cover V/G 2000BC* 2" [51mm] V2003 2003 Description/Specifications Catalog No./Item Base and Cover Covers seam between sections of 5400C. 2009 5' 5' 5' LENGTH [1.5m] [1.5m] [1.5m] MATERIAL .040 Steel .025 Steel .025 Steel Description/Specifications 1 7/32" [31mm] Ground Clamp – For connection of equipment grounding conductor to provide additional ground to raceway. Use with V/G2000 Series. How 2009 is used.
PAGE 3
V/G 2000 Series Catalog No./Item V2048 G2048 4 5/8" [117mm] 2 7/8" [73mm] 1 3/4" [44mm] V2048-2 4 3/4" [121mm] 4 3/4" [121mm] 1 3/4" [44mm] V2089 Description/Specifications Catalog No./Item Description/Specifications Single Gang Device Box – Cover has twistouts for 2000, V500, and V700 Raceway. Base has 1/2" trade KO and rectangular KO for extension to wall box. Base has #10 threaded hole for ground connection.
PAGE 4
V2400 Series Catalog No./Item V2411 15/16" [23.8mm] Description/Specifications Catalog No./Item Description/Specifications 90º Flat Elbow – For right angle turns on the same surface (nonmetallic cover). V2489 Side Reducing Connector – For connecting V2400 with V500 Raceway. V2444 V2444-2 Extra Deep Device Box – Base has rectangular knockout to enable extension from existing single-gang flush wall box and 1/2" and 1" concentric KOs.
PAGE 5
AL Series (Continued) Catalog No./Item Description/Specification Catalog No./Item AL2000WC AL2400WC Wire Clip – Holds conductors in place in raceway (nonmetallic). AL2011 AL2411 AL2001 AL2401 AL2006 AL2406 CAT NO. AL2011 AL2411 1 1/2" [38mm] AL2009 AL2416 6" [152mm] Ground Clamp – Use with AL2400 Series.For connection 1 3/4" [44mm] AL2017 AL2417 A A 1" [25mm] AL2018 AL2418 End Fitting – With 1/2" plastic KO. Use with AL2400 Series.
PAGE 6
AL Series (Continued) Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications AL2043IG In-line Isolated Ground Receptacle – Two 15A, 120V factory wired, isolated ground, orange receptacles. Couplings furnished. AL2047 Shallow Switch and Receptacle Box – Designed for standard shallow switches and receptacles. Base has open back plate for mounting to existing wall box and solid back plate insert with 1/2" and 3/4" KO to close opening.
PAGE 7
NM2000 Series Catalog No./Item NM2051H NM2051V 2 3/4" [70mm] 2 3/4" [70mm] (Continued) Description/Specifications Catalog No./Item Wall Box Adapter – For feeding raceway from an existing wall outlet; horizontal or vertical applications. Provides complete access to wall box for connections. NM2015 Description/Specifications Tee – For branches at right angles. raceway. Four couplings 1 5/8" 1 5/16" furnished.
PAGE 8
Wiring Configuration With Snapicoil GB Series: 3-wire, #12 THHN (1 hot, 1 neutral and 1 ground), 1 circuit; has insulated grounding conductor. GBA Series: 4-wire, #12 THHN (2 hot, 1 neutral and 1 ground), 2 circuit; outlets wired alternately; has insulated grounding conductor. IG Series: 3-wire, #12 THHN (1 hot, 1 neutral and 1 ground), 1 circuit; has insulated-isolated grounding conductor. Orange receptacles.
PAGE 9
Plugmold Multi Outlet Strip CATALOG NO. LENGTH WIRING CONFIG (Continued) OUTLETS CENTER DISTANCE QUANTITY HOUSING 20GB606* 6' [1.8m] GB 6" [152mm] 12 Single 15A Steel 20GB609* 6' [1.8m] GB 9" [229mm] 8 Single 15A Steel 20GB612* 6' [1.8m] GB 12" [305mm] 6 Single 15A Steel 20GB618* 6' [1.8m] GB 18" [457mm] 4 Single 15A Steel 20GBA609* 6' [1.8m] GBA 9" [229mm] 8 Single 15A Steel 20GBA612* 6' [1.8m] GBA 12" [305mm] 6 Single 15A Steel 20GBA618* 6' [1.
PAGE 10
Plugmold with Snapicoil Harness CATALOG NO. LENGTH WIRING CONFIG OUTLETS (15A 120V NEMA 5-15SR) HOLE CUT COVER CENTER DISTANCE QUANTITY QUANTITY LENGTH HOUSING 20GB12* 48' GB 12" [305mm] 48 Single 8 6' [1.8m] Steel 20GB18* 48' GB 18" [457mm] V20GB30 50' GB 30" [760mm] 32 Single 8 6' [1.8m] Steel 20 Single 10 5' [1.5m] Steel-Ivory NM20GB12 48' GB 12" [152mm] 24 Duplex 8 6' [1.8m] PVC-Ivory 20GBA12* 48' GBA 12" [305mm] 48 Single 8 6' [1.
PAGE 11
Cross Section Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications 2000 Base and Cover – Base – 2000B .040" [1.0mm] steel. Cover – 2000C .025" [.6mm] steel. AL2400 Base and Cover – 6063-T5 extruded aluminum, satin anodized finish, .060" [1.5mm] nominal thickness. 1 9/32" [33mm] 3/4" [19.1mm] Cross-Sectional Area: 1.7in2 [1097mm2] Cross-Sectional Area: 0.80in2 [516mm2] 1 9/32" [33mm] 2" [51mm] V2400 Base and Cover – Base – V2400B .040" [1.0mm] steel.
PAGE 12
Datacom Connectivity Options Now you have a wide range of options for providing datacom connectivity into Wiremold® Cable Management Systems.