Cut Sheet

* Use “V” prefix for Ivory finish and “G” prefix for Gray finish.
CATALOG WIRING OUTLETS (15A 120V NEMA 5-15SR) HOLE CUT COVER
NO. LENGTH CONFIG CENTER DISTANCE QUANTITY QUANTITY LENGTH HOUSING
20GB12* 48' GB 12" [305mm] 48 Single 8 6' [1.8m] Steel
20GB18* 48' GB 18" [457mm] 32 Single 8 6' [1.8m] Steel
V20GB30 50' GB 30" [760mm] 20 Single 10 5' [1.5m] Steel-Ivory
NM20GB12 48' GB 12" [152mm] 24 Duplex 8 6' [1.8m] PVC-Ivory
20GBA12* 48' GBA 12" [305mm] 48 Single 8 6' [1.8m] Steel
NM20GBA12 48' GBA 12" [305mm] 24 Duplex 8 6' [1.8m] PVC-Ivory
Plugmold with Snapicoil Harness
10
* Use “V” prefix for Ivory finish and “G” prefix for Gray finish.
UNIT OUTLETS CIRCUIT
CAT NO. LENGTH QUANTITY CORD SET LENGTH TYPE SWITCH BREAKER HOUSING
NM20-C3 3' [.92m] 3 Duplex 6' [1.8m] 14/3 SJT Yes Yes PVC-Ivory
20-C2* 3' 4" [1m] 6 Single 6' [1.8m] 12/3 SJT No Yes Steel
NM20-C4 4' [1.2m] 4 Duplex 6' [1.8m] 14/3 SJT Yes Yes PVC-Ivory
NM20-C5 5' [1.5m] 5 Duplex 6' [1.8m] 14/3 SJT Yes Yes PVC-Ivory
NM20-C6 6' [1.8m] 6 Duplex 6' [1.8m] 14/3 SJT Yes Yes PVC-Ivory
Cord-Ended Plugmold Series
CABLE WIRE SIZE O.D. NUMBER OF CONDUCTORS (40% FILL)
TYPE THHN/THWN Inches [mm] V2000 V2400 NM2000 AL2000 AL2400
POWER WIRING 8 AWG 0.216 [5.5] – – – 12 18
WITHOUT DEVICES 10 AWG 0.166 [4.2] – 26 15 24 37
12 AWG 0.130 [3.3] 7* 41 31 38 58
14 AWG 0.111 [2.8] 7* 57 45 51 78
POWER WIRING 8 AWG 0.218 [5.5] – 2 – – 4
WITH DEVICES 10 AWG 0.153 [3.9] – 6 – 3 8
(PLUGMOLD) 12 AWG 0.122 [3.1] 5* 10 8** 6 12
14 AWG 0.105 [2.7] 5* – 8** 8 16
Wire Fill Capacities for Power
*Wire capacity limited to maximum of seven conductors due to .025" [.6mm] material thickness of cover.
**Including one hot, neutral, and ground wire from the receptacle.