Installation Manual

4
trade size
Catalog No./Item Description/Specifications
2409 Ground Clamp – No. 10
ground screw provided.
Use with V2400 Series.
V2410A Entrance End – For connecting
V2400 with 1/2" trade size conduit
and armored cable. Use with
V2400 Series.
V2410B Blank End – For closing open
end of V2400 Series.
V2410C Entrance End Fitting – Has 1/2"
and 3/4" trade size KOs on end
and bottom. Additional 1/2" trade
size KO on sides.
Catalog No./Item Description/Specifications
Base and Cover Covers seam
between sections of 5400C.
2401 Coupling – For joining
lengths of raceway. Use
with V2400 Series.
2400WC Wire Clip – Holds conductors
2400WC in place in raceway.
AL2000WC
AL2400WC
NM2000WC
V2406 Cover Clip – For covering
joint where lengths of cover
or base adjoin. Use with
V2400 Series (nonmetallic).
2"
[51mm]
1 1/2"
[38mm]
1"
[25mm]
Catalog No./Item Description/Specifications
V2089E End Reducing Connector
–
For connecting V2000 with
V500 Raceway through end
of V2000.
rectangular KO for extension to
wall box. Base has #10 threaded
620 2000 Raceway Base and
Cover Cutter – Portable
cutter for 2000 Cover and
Base. Tool steel construction
for clean and easy square
cuts every time. Total
manual operation.
620BCK Replacement Blade Kit –
Replacement blades and
die set for 620 Cutter.
Catalog No./Item Description/Specifications
BK2048* Single Gang Device Box –
G2048* Cover has twistouts for 2000,
V2048* V500, and V700 Raceway.
WH2048* Base has 1/2" trade KO and
S2048* rectangular KO for extension to
wall box. Base has #10 threaded
hole for ground connection.
V2048-2 Two-Gang Device Box – Cover
has G2048-2 Twistouts for 2000,
V500, and V700 Raceway.
Base has 1/2" trade KO and
rectangular KO for extension to
wall box. Base has #10 threaded
hole for ground connection.
V2089 Side Reducing Connector –
For connecting V2000 with V500
Raceway through side of V2000.
orange receptacles.
Couplings furnished.
V/G 2000 Series
(continued)
1/2"
[12.7mm]
2"
[51mm]
1 5/8"
[41mm]
1 3/16"
[46mm]
1 3/16"
[30mm]
2 7/8"
[73mm]
1 3/4"
[44mm]
1 3/4"
[44mm]
4 5/8"
[117mm]
4 3/4"
[121mm]
4 3/4"
[121mm]
6"
[152mm]
3 1/4"
[83mm]
3/4"
[19.1mm]
V2400 Series
ITEM CAT NO. LENGTH MATERIAL
Base V2400B 5' [1.5m] .040 Steel
Cover V2400C 5' [1.5m] .040 Steel
Base & Cover V2400BC 5' [1.5m] .040 Steel
2 11/16"
[68mm]
1 7/8"
[48mm]
2 1/8"
[54mm]
* Use “V” prefix for Ivory ScuffCoat
™
finish, “G” prefix for Gray enamel finish, “BK” for Black ScuffCoat
™
finish, “WH” for white enamel finish,
and “S” for stainless steel.