Cut Sheet

6
FEATURES STANDARD OPTIONS
Communication Devices Ortronics or Activate Connectivity Other manufacturers
System Devices
Electrical Devices Pass & Seymour Other manufacturers and some In ter na tion al devices
Body Length Longest = 10' (2.54m), shortest = 1' (305mm) —
Installation Surface mounted —
Finish Baked enamel nish Standard colors of baked powder epoxy or
custom colors
Wire Type THHN stranded Options per specication
Wiring Splices Insulation displacement connectors Continuous wiring or twist-on wire connector
Grounding Conductors Wire gauge per National Electrical Oversized and/or separate grounding wires
Code (NEC) and shared grounding wires
Device Identification Gray self-adhesive polyester label Self-adhesive engraved nameplate,
with black letters Interlink labeling software for communication
devices available
Neutrals Shared neutral Oversized and/or separate neutral wires
Pigtails 12" (305mm) feeds and receptacle leads Per specication
Conduit Feeds Raceway drilled at job site Entrance end cap
Device Mounting Steel plates —
Record Drawings Three sets and two copies of Per job requirements
marked-up blueprints
Submittal Services Detailed submittal Submittal free
3000 Series Raceway Prewired Features
Device and Raceway Labeling Detail for Prewired Applications
n Device labeling is available in the following materials:
Gray self-adhesive polyester label with black
lettering (stan dard).
Other color self-adhesive polyester labels.
Engraved phenolic nameplates with adhesive back ing.
n The back of the raceway is labeled with the raceway
number and the room or area number(s).
3000 Series Ordering Specifications for Prewired Applications
1. Detailed Submittal The detailed submittal will show exactly how each
raceway run will be built including lengths, number
and type of receptacles, wiring schematics, circuiting
information, etc. The contractor and/or distributor must
review, clarify any information not clearly indicated on
the drawings or specs, approve and return to the factory
before production can begin.
2. Submittal Free The Wiremold Prewired Checklist is lled out by the
contractor or distributor and sent along with plans,
casework and specs to the factory. No submittal is
required and the project is scheduled for production
upon receipt of all necessary information.
Two options available when ordering a prewired job:
3000 Series Raceway shown electrically prewired.