Cut Sheet

WD10W350-60 A WD18W600-HL
Steel Wallduct Fitting Type
Width in Inches Depth in Inches
Depth in Inches Width in Inches
Length in Inches Aluminum Wallduct
Catalog No./Item Description/Specifications
Bodies
“A” Straight Wallduct With Removable Cover Plates –
WD06W350-60 6" [152mm] Bodies include two coupling angles, two wire retainers, and assembly
WD10W350-60 10" [254mm] screws. Bodies are 5' [1.3m] long and can be field cut to length.
WD18W350-60 18" [457mm] Surface flush covers are 30" [762mm] long. Two covers required
per body. See page 10 for wire/cable fill capacity information.
Surface Covers
“B”
CP06-S30 6" [152mm]
CP10-S30 10" [254mm]
CP18-S30 18" [457mm]
Flush Covers “B”
CP06-F30 8" [203mm]
CP10-F30 12" [305mm]
CP18-F30 20" [508mm]
Width 6" 10" 18" 24" 30"
Depth [152mm] [254mm] [457mm] [610mm] [762mm]
3 1/2" [89mm] ✸ ✸✸✸
6" [152mm] ✸✸ ✸ ✸✸
8" [203mm] ✸✸
12" [305mm] ✸
3
Catalog Numbering Sequence
Wallduct Bodies and Covers
Wallduct Sizes Available
3 1⁄2"
[89mm]
B
A – End View
(Flush Cover Shown)
60"
[1524mm]
B
30"
[762mm]
30"
[762mm]
IMPORTANT
Stock sizes are 10" x 3 1/2" [254mm x 89mm] and 18" x 3 1/2" [457mm x 89mm].
Only 5' [1.3m] lengths available. Only 3 1/2" [89mm] depth catalog numbers are
included in this literature. Use catalog numbering sequence to create other available
catalog numbers. Change width and depth according to sizes on chart above. For
aluminum version, add the letter “A” to the beginning of the catalog number.
NOTE: To order aluminum products, add the letter “A” to the beginning of the catalog number.