Cut Sheet

4
Catalog No./Item Description/Specifications
WD350-P60 Straight Partition –
Used to separate services.
Includes assembly screws
for field installation.
NOTE: Add the letter “A” in front
of Catalog No. for alu-
minum.
WD350-CA Coupling Angle –
Used for connecting two
pieces of Wallduct. Includes
assembly screws. Two coupling
angles included with every
straight body assembly.
NOTE: Add the letter “A” in front
of Catalog No. for alu-
minum.
Catalog No./Item Description/Specifications
“A” Wire Retainer –
WD06-WR 6" [152mm] Used to hold wires in place
WD10-WR 10" [254mm] during installation and to close
WD18-WR 18" [457mm] gap between cover plates if
more than 1/8" [3.2mm]. Snap
in place prior to installing cover
plates. Two wire retainers are
included with every straight
body assembly.
NOTE: Add the letter “A” in front
of Catalog No. for alu-
minum.
WD350-CP Corner Partition – Used in
horizontal elbow to form
corner partition. Assembly
screws included. Two wire
retainers are included with
every straight body assembly.
60"
[1525mm]
3 1/4"
[83mm]
Wallduct Body Accessories
1 1⁄2"
[38mm]
A
4
3 3⁄16"
[81mm]
2"
[51mm]
1 1⁄2"
[38mm]
Catalog No./Item Description/Specifications
Surface End Closur
es
“A” “B” End Closure – Used to close off end of
WD06W350-ECS 6" [152mm] 6" [152mm] Wallduct run. Includes assembly screws.
WD10W350-ECS 10" [254mm] 10" [254mm]
WD18W350-ECS 18" [457mm] 18" [457mm]
Flush End Closur
es “A” “B”
WD06W350-ECF 6" [152mm] 8" [203mm]
WD10W350-ECF 10" [254mm] 12" [305mm]
WD18W350-ECF 18" [457mm] 20" [508mm]
End Closure
1"
[25mm]
A
B
3 1⁄2"
[89mm]
4"
[102mm]
9/16"
[14.3mm]
3 1/4"
[83mm]
NOTE: To order aluminum products, add the letter “A” to the beginning of the catalog number.
NOTE: To order aluminum products, add the letter “A” to the beginning of the catalog number.
NOTE: Aluminum end closures available in flush type only.
Product Notes
To attach Wallduct to Trenchduct, use vertical risers as shown in the current version of ED738. All field cut openings in Wallduct
should be grommeted as needed to protect edges from cutting cables and wires. Order Catalog # 686039-100FT.
Contact factory for availability of other sizes of Wallduct.