Cut Sheet

Catalog No./Item Description/Specifications
Bodies
“A” 45° Elbow – Used to change direction
WD06W350-HL45 6" [152mm] of Wallduct runs 45° on same plane. Includes one
WD10W350-HL45 10" [254mm] pair of coupling angles, one retainer, and assembly
WD18W350-HL45 18" [457mm] screws. Complete unit requires one body and one
cover plate.
Surface Covers
“A”
CP06-HLS-45 5 5/8" [143mm]
CP10-HLS-45 7 1/4" [185mm]
CP18-HLS-45 10 1/2" [270mm]
Flush Covers
“A”
CP06-HLF-45 6" [153mm]
CP10-HLF-45 7 3/4" [196mm]
CP18-HLF-45 11" [280mm]
Bodies “A”
Horizontal Elbow – Used to change direction
WD06W350-HL 6" [152mm] of Wallduct runs 90° on same plane. Includes one
WD10W350-HL 10" [254mm] pair of coupling angles, one retainer, and assembly
WD18W350-HL 18" [457mm] screws. Complete unit requires one body and one
cover plate.
Surface Covers
“B”
CP06-HLS 7" [178mm]
CP10-HLS 11" [279mm]
CP18-HLS 19" [482mm]
Flush Covers
“B”
CP06-HLF 8" [203mm]
CP10-HLF 12" [305mm]
CP18-HLF 20" [508mm]
Bodies “A” Internal Elbow – Used to connect vertical and
WD06W350-IL 6" [152mm] horizontal run at 90° when cover plates are on
WD10W350-IL 10" [254mm] inside of run. Includes one pair of coupling
WD18W350-IL 18" [457mm] angles, wire retainer, and assembly screws.
Complete unit requires one elbow body and
Surface Covers
“B” one cover plate.
CP06-ILS 6" [152mm]
CP10-ILS 10" [254mm]
CP18-ILS 18" [457mm]
Flush Covers
“B”
CP06-ILF 8" [203mm]
CP10-ILF 12" [305mm]
CP18-ILF 20" [508mm]
Bodies “A” External Elbow – Used to connect vertical and
WD06W350-EL 6" [152mm] horizontal run at 90° angle when cover plates are
WD10W350-EL 10" [254mm] on outside of run. Includes attached coupling angles,
WD18W350-EL 18" [457mm] wire retainer, and assembly screws. Complete unit
requires one elbow body and two cover plates.
Surface Covers
“B” Flush and surface cover catalog numbers include
CP06W350-ELS 6" [152mm] two covers.
CP10W350-ELS 10" [254mm]
CP18W350-ELS 18" [457mm]
Flush Covers
“B”
CP06W350-ELF 8" [203mm]
CP10W350-ELF 12" [304mm]
CP18W350-ELF 20" [508mm]
5
Wallduct Fittings
3 1⁄2"
[89mm]
A
A
B
B
5
B
A
A
B
A
A
3 1/2"
[89mm]
NOTE: To order aluminum products, add the letter “A” to the beginning of the catalog number.